Moxa WAC-1001 [23/56] Snmp agent
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa WAC-1001 [23/56] Snmp agent

Moxa WAC-1001 [23/56] Snmp agent
WAC-1001 Web Console Configureation
3-10
Advanced Settings
SNMP Agent
The WAC-1001 supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string public/private (default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.
The WAC-1001’s MIB can be found in the software CD and supports reading the attributes via SNMP. (Only get
method is supported.)
SNMP security modes and security levels supported by the WAC-1001 are shown in the following table. Select
the security mode and level that will be used to communicate between the SNMP agent and manager.
Protocol
Version
Setting on
UI web page
Authentication
Type
Data
Encryption
Method
SNMP
V1, V2c
V1, V2c
Read
Community
Community
string
No Use a community string match for
authentication
V1, V2c
Write/Read
Community
Community
string
No Use a community string match for
authentication
SNMP V3 No-Auth No No Use account with admin or user to access
objects
MD5 or SHA Authentication
based on MD5 or
SHA
No Provides authentication based on
HMAC-MD5, or HMAC-SHA algorithms.
8-character passwords are the minimum
requirement for authentication.
MD5 or SHA Authentication
based on MD5 or
SHA
Data
encryption
key
Provides authentication based on HMAC-
MD5
or HMAC-SHA algorithms, and data
encryption key. 8-character passwords and a
data encryption key are the minimum
requirements for authentication and
encryption.
The following parameters can be configured on the SNMP Agent page. A more detailed explanation of each
parameter is given below the following figure.

Содержание

Похожие устройства

Скачать