Moxa MxNVR-MO4 [6/61] Introduction

Moxa MxNVR-IA8 Introduction

1-2

Overview

The MxNVR-IA8 is a revolutionary new 8-channel industrial network video recorder designed for recording the

MxNVR’s MJPEG, MPEG4, and H.264 video streams in harsh environments. With rugged design features, such

as no heater or fan, -40 to 75°C operating temperatures, and protection against high EMI and surges, as well

as the ability to save bandwidth when transmitting video streams back to the remote control center or machine

room for video recording, the MxNVR-IA8 is tailor-made for field site applications. Since videos are only

transmitted when remote live view and video playback are required, you will see an improvement in network

transmission efficiency and a noticeable reduction in your bandwidth investments.

Package Checklist

The MxNVR-IA8 ships with the following items:

• The MxNVR-IA8

• 2 rackmount ears with screws

• 1 3-pin terminal block for power input

• 2 5-pin terminal blocks for the 6 DIs and 2 DOs

• 8 HDD screws

• 4 pads

• Quick installation guide

• Documentation and software CD

• Warranty card

Note: If any of these items are missing or damaged, please contact your service representative for assistance

Product Features

• Supports MJPEG, MPEG4, and H.264 video recording (only for the MxNVR products)

• Capable of recording up to 8 video stream channels and 240 frames/second at 720x480 resolution

• Built-in 2 SATA interface for 2 SSDs (solid state hard disks) or 2.5 inch hard disks

• Linux OS platform stored in a DOM for high reliability

• No built-in heater and fan

• Supports remote playback and FTP download for recorded videos

• Supports recording in AVI format, which can be played by general media players

• 3 video recording modes: manual, schedule, and alarm

• Supports pre-alarm (up to 30 seconds) and post-alarm (60 seconds) video recording functions

• Web console for system configuration

• Built-in one Gigabit Ethernet for video transmission

• Provides 2 RS-232/422/485 COM ports for connecting external devices

• Provides 6 DIs (digital inputs) and 2 DOs (digital outputs) for external sensors and alarms

• Provides 1 USB port for connecting peripheral devices

• Supports 802.1X, IP filtering for access authentications

• Supports Modbus/TCP for direct SCADA communications

• Supports SNMP for network management

• Supports CGI commands for customized programming

• 8 built-in LED indicators for showing the status of each video channel

• 1 built-in LED for showing the storage status