Hama H-108728 [2/18] Operating instruction
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hama H-108728 [2/18] Operating instruction

Hama H-108728 [2/18] Operating instruction

Содержание

Похожие устройства

GB Operating instruction Thank you for choosing a Hama product When doing so ensure that the product does not exceed its Take your time and read the following instructions and information maximum permitted carrying capacity and that no load exceeding completely Please keep these instructions in a safe place for the maximum permitted dimensions is attached future reference If you sell the device please pass these operating Make sure that the product is loaded symmetrically instructions on to the new owner During adjustment ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded 1 Explanation of Warning Symbols and Notes During installation the hinges are to be adjusted so that the TV can be moved Check whether your television is level using the included spirit level If necessary adjust the television plate 6 Setting and maintenance Maintain the necessary safety clearance around the attached load depending on the model In the event of damage to the product remove the attached load and stop using the product 4 Intended use and specifications The bracket is used for wall mounting flat panel displays for non Gerade Rückseite flat back commercial private household use Runde Rückseite curved back The bracket is only intended for use within buildings Use the bracket only for the intended purpose Maximum load bearing 2 Package Contents capacity Screws do not have to be loosened for lateral movement The tilting resistance can be adjusted using the screws on the side of the vertical TV plate see figure 5 8 15 kg TV wall bracket TV plate cover Screen size 58 0 117 0 cm US 23 46 Depth 6 0 42 0 cm Wall plate cover 2x Installation kit see contents Fig 1 If the screen is too light for the current setting the carrying arm will automatically move upward This means that the spring rate These operating instructions must be reduced by turning the locking screw in the direction If the carrying arm automatically moves downward the spring Angle 2 12 depends on the device rate must be increased Only adjust the gas springs when the carrying arm is completely Pivoting range Wall mounting plate 3 Safety Notes dimensions up to 180 on 2 joints and 1 carrier arm lowered To adjust the spring rate use the Allen key G2 to turn the locking 7 5 x 17 0 cm screw in the appropriately marked direction or while the carrying arm is completely lowered Fig 5 After adjusting the spring rate check whether the carrying arm with Mounting holes 3 according to the VESA standard 200x200 the installed load remains in various positions or automatically moves up or down If necessary repeat the adjustment process while Given the multitude of terminal devices and wall structures 5 Installation requirements and installation available on the market the supplied mounting kit is unable to Depending on the weight of the screen adjustment may take up to cover every option 40 full rotations of the locking screw Do not overtighten the locking It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only Read the operating instructions for your terminal device before screw screw suddenly becomes difficult to move Only mount the TV wall bracket with the help of a second person Get the support and help you need Different end devices have different options for connecting cables and other devices Before installation ensure that the attempting to mount it The instructions provide information necessary connections will still be accessible after installation about the type and measurements of suitable fastening The same mounting kit is included with all of our TV wall materials brackets Depending on the product and mounting type you If the supplied mounting kit does not contain suitable fastening the carrying arm is completely lowered may not need to use the entire mounting kit Unneeded screws Once you have mounted the product and the attached load check that they are sufficiently secure and safe to use You should repeat this check at regular intervals at least every three months Only clean this product with a slightly damp lint free cloth and do not use aggressive cleaning agents 7 Warranty Disclaimer materials for mounting the terminal device purchase these from and other small parts may be left over even if the wall bracket is Hama GmbH Co KG assumes no liability and provides no warranty a specialised dealer properly mounted Keep these leftover parts with the operating for damage resulting from improper installation mounting improper If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified purchase suitable mounting materials from a specialised dealer instructions in a safe place just in case you might need them use of the product or from failure to observe the operating instructions later on e g should you move sell the product mount the wall and or safety notes bracket in a different location buy a new TV etc 8 Service and Support Never apply force during mounting This can damage your end Please contact Hama Product Consulting if you have any questions device or wall bracket If in doubt have this product mounted by a qualified technician do not attempt to mount it yourself about this product Before installing the bracket ensure that the wall on which the Hotline 49 9091 502 115 German English television is to be mounted is suitable for the weight and make Further support information can be found here Do not mount the product above locations where persons might sure that no electrical wires water gas or other lines are located www hama com linger at the installation location Once you have mounted the product and the attached load check Please note that the provided wall anchors are only approved for that they are sufficiently secure and safe to use concrete and solid brick walls You should repeat this check at regular intervals at least every three months Observe the other warnings and safety instructions Proceed step for step in accordance with the illustrated installation instructions Fig 1 ff 2 00108728man cs_de_el _en_es_fi fr hu it nl pl pt ro ru sk sv tr indd 5 3 21 08 14 07 48

Скачать