Gorenje SGT2400BW [36/104] First time ironing

HOW TO FILL WATER

The appliance has an electronic system to monitoring the water level. When the water level is lower

than the pre-set value, the icon will blink with beep sound until the water is re-filled.

1. Disconnect the power cord from mains supply outlet.

2. Press the water tank release button and pull out the water tank.

3. Open the water inlet cover.

4. Fill water through the water inlet hole up to MAX level marked on the side of water tank.

5. Close the water inlet cover.

6. Replace the water tank in its place.

FIRST TIME IRONING

1. Remove any protective films or sticker from the soleplate and the cabinet, if any.

2. Unwind and straighten the power cord and supply cord.

3. Fill the water tank with tap water. (See HOW TO FILL WATER)

4. Connect the appliance to a suitable mains supply outlet.

5. “Beep” sound would be heard and the LCD would display all logos for a Second then turn off.

6. Press the power On/Off button

7. The medium steam level ( ) and medium hard water level ( ) indicators will display in the

LCD with a beep sound.

8. The will blink to indicate; the steam generator is heating up or cooling down for the steam

ironing.

9. Select the Max steam level ( ) indicator by press the “+” LCD control button, a beep sound would

be heard.

10. Turn the Temperature Dial on the Iron unit in clockwise direction to Maximum position, the Pilot

Light will glow.

11. The steam generator pressure will increase step by step.

12. The will disappear from the LCD, when the steam generator reached the appropriate heat

13. Pilot Light goes off when the required temperature for the iron unit is reached.

14. The appliance is ready to use.

15. Depress the Steam Button for 1 minute to clean the steam generating system.

16. Begin first time ironing with an old towel

Note:

1. The steam never come out until the steam generator reached the required temperature

2. It takes about one minutes to reach its required temperature.