Gorenje SGT2400BW [40/104] Self clean

Gorenje SGT2400BW [40/104] Self clean
40
SELF CLEAN
Your Steam Generator has a built in cleaning system designed to keep the steam vents and steam
chamber clear of lint and loose mineral material. Suggest doing once a month.
1. Unwind and straighten the power cord and supply cord.
2. Fill the water tank with tap water. (See How to fill water)
3. Connect the appliance to a suitable mains supply outlet.
4. Ensure “Steam Level” Indicators in MAX position.
5. Ensure the Temperature Dial on the iron in MIN position.
6. The appliance is ready for self-clean.
7. Hold the iron about 6”(150mm) above the sink in the ironing position, presses and hold the Steam
Button to about 3 minutes. Loose material will come out through the steam holes of the iron
together with water.
8. Turn the Temperature Dial on the iron unit in anti-clockwise direction to “Max
9. Ironing with a damped cloth to remove any deposits on the soleplate
10. Turn the Temperature Dial to “min” position
11. Disconnect the power cord from mains supply outlet.
12. When the appliance gets cool completely, store it in a safe place.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If you are
unable to solve the problem with the information below, please contact the Gorenje Consumer Care
Centre in your country.
PROBLEM: POSSIBLE CAUSE AND SOLUTION:
The appliance does
not become hot.
There is a connection problem. Check the mains cord, the plug and the
wall socket.
The appliance has not been switched on. Set the on/off knob toon’.
The set temperature is too low. Set a higher temperature.
Smoke comes out of
my new ironing
system when I switch
it on.
Some parts of the appliance have been lightly greased in the factory
and may initially give off some smoke when heated. This phenomenon
is perfectly normal and ceases after a short while.
The appliance does
not produce any
steam.
There is not enough water in the water tank. Fill the water tank.
The steam generator has not heated up sufficiently. Wait approx. 2
minutes.
The set ironing temperature is too low for steam ironing. Select a
temperature of 2 or higher.
The water tank is not placed properly in the steam generator. Place the
water tank properly in the steam generator (‘click’).
When the temperature dial is set to a very high temperature, the steam
produced is dry and hardly visible. It is even less visible when the
ambient temperature is relatively high and it is entirely invisible when
the temperature is set to MAX. Set the temperature dial to a lower
temperature, e.g. 2, to check if the iron produces steam.

Содержание

Скачать
Случайные обсуждения