Gorenje SGT2400BW [38/104] Anti cal system and alert system

Gorenje SGT2400BW [38/104] Anti cal system and alert system
38
DRY IRONING
1. Unwind and straighten the power cord and supply cord.
2. Connect the appliance to a suitable mains supply outlet.
3. “Beep” sound would be heard and the LCD would display all logos for a Second then turn off.
4. Press the power On/Off button
5. The medium steam level ( ) and ( ) Medium hard water level indicator will display in the
LCD with a beep sound.
6. The will blink to indicate; the base unit is heating up or cooling down.
7. Turn the Temperature Dial on the iron in clockwise direction; select ’ (1 dot), ••(2 dots) or •••’ (3
dots) according to the recommendation of garment label.
8. Pilot Light glow until the required temperature for the iron unit is reached.
9. Select the dry iron indicator ( ) by press the “-“LCD control button, a beep sound would be heard
for each LCD control button pressing.
10. If the steam generator has the steam pressure, the pressure indicator will display in the LCD.
11. Pilot Light goes off when the required temperature for the iron unit is reached.
12. The appliance is ready to use.
13. Turn the Temperature Dial on the iron unit in anti-clockwise direction to “Min” and the iron is
switched off.
14. Press the Power On/Off switch, the base console will switch to “Standby mode” with a beep sound.
15. Disconnect the power cord from mains supply outlet.
16. When the appliance gets cool completely, store it in a safe place.
AUTO SHUT-OFF
Auto shut off system will activate if appliance is not used over 10 minutes. LCD display
back light goes off with a beep sound and the pause icon will blink. When this occurs,
press the Power ON/OFF button once, the appliance will switch ON immediately. Wait
about one and half minutes for the appliance to heat up to the temperature set before
ANTI-CAL SYSTEM AND ALERT SYSTEM
The appliance has an electronic system monitoring the life of anti-cal cartridge.
The anti-cal cartridge will purify the water and remove the permanent and temporary hardness. There
are anti-scale resins in the cartridge. Depending on the water hardness and actual usage, the cartridge
needs to be replaced from time to time.
When the “Change Anti-Cal” indicator blinking, you should replace the cartridge
WATER HARDNESS SETTING
1. Unwind and straighten the power cord and supply cord.
2. Connect the appliance to a suitable mains supply outlet.
3. “Beep” sound would be heard and the LCD would display all logos for a Second then turn off.
4. Press the power On/Off button
5. The medium steam level ( ) and ( ) hard water level indicators will display in the LCD
with a beep sound.

Содержание

Скачать
Случайные обсуждения