Gorenje SGT2400BW [39/104] Replacing anti cal cartridge

6. The icon will blink to indicate; the steam generator is heating up or cooling down for the steam

ironing.

7. Press once the water hardness setting button, them icon will display in the LCD with a beep

sound

8. Select your usage water hardness by press the “-, +” LCD control buttons; Soft water ( ) or Hard

water ( ) or Very Hard water ( ).

9. A beep sound would be heard for each pressing.

REPLACING ANTI-CAL CARTRIDGE

1. The “Change Anti-Cal” indicator blinking.

2. Keep your Steam Generator remain ON mode.

3. Slide out the water tank.

4. Slide out the anti-cal cartridge container and replace anti-cal cartridge.

5. Wait for 20 seconds after Step 4 to reinstall the anti-cal cartridge container.

6. Reinstall the water tank.

Note:

Anti-cal cartridge cannot be removed unless water tank is slide out If the anti-cal cartridge container is

not properly install, a continuous a “beep” sound will hear when press steam button.

If anti-cal cartridge is replaced during OFF mode, the anti-cal electronic system will not recognize a new

cartridge has been change.

Important:

Please do not attempt to use the exhausted anti-cal cartridge. This will cause damage to the appliance

and the electronic system.

Please do not left the anti-cal cartridge container empty. This will cause damage to the appliance and

the electronic system.

SPRAYING

This function can be used any time and is not affect any setting.

1. Remove the spray button.

2. Fill the water tank.

3. Replace the water tank in its place.

4. Aim the nozzle to the garment. Press the Spray Button.

Note: It may be necessary to press the spray button a few times to start this function.