Hitachi CL 14 DSL Инструкция по эксплуатации онлайн [27/34] 167

-25-

(h) Confirmation after reassembly

Before mounting the Cover [34], install the battery and check the following operations.

(i) Set Pushing Button (A) [2] to the position and check that the Cam Shaft [50] rotates

clockwise as shown in Fig. 31.

(ii) Set Pushing Button (A) [2] to the position and depress the Switch [12].

Check that the motor does not rotate.

(iii) Pressing Pushing Button (A) [2] to the position, depress the Switch [12]. Check that the

Cam Shaft [50] rotates counterclockwise (in the reverse direction of Fig. 31).

(iv) Check that Pushing Button (A) [2] returns to the position when releasing Pushing

Button (A) [2].

Fig. 31 Rotating direction of the Cam Shaft [50] when Pushing Button (A) [2] is set to the position