Kaiser KCG 6972 N [6/52] Electrical connection

NSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTION

Before connecting the cooking hob to the mains

power supply, make sure that:

x the plant characteristics are such as to

follow what is indicated on the matrix plate

placed at the bottom of the working area,

x the mains supply has an efficient ground

connection complying with all applicable

laws and regulations.

Correct grounding is a legal requirement. If the

appliance is not pre-fitted with a power cable and/or

plug, use only suitable cables and plugs capable of

handling the power specified on the appliance's

data plate and capable of resisting heat. The power

cable should never reach a temperature 50°C

above ambient temperature at any point along its

length.

If the appliance is to be connected directly to mains

terminals, fit a switch with minimum aperture of 3

mm between the contacts. Make sure that the

switch is of sufficient capacity for the power

specified on the appliance's data plate, and

compliant with applicable regulations. The switch

must not break the yellow-green earth wire. The

socket or switch must be easily reachable with the

cooking hob fully installed.

Attention! The manufacturer declines all

responsibility for damage or injury if the

above instructions and normal safety

precautions are not respected.

Attention! Installation and electrical

connection must be made by a qualified

expert only.