Vitek VT-1519 BK [4/32] English

Vitek VT-1519 BK [4/32] English
4
ENGLISH
To make sure that the steam supply is
blocked, turn the handle (5) clockwise till
the clamp.
Before using the unit for the first time, wash
all removable parts with warm water and
wipe them with a dry cloth.
Before switching on the unit, make sure that
voltage of your home electric main corre-
sponds to the voltage specified on the unit.
Remove the tank (3), fill it with cold water till
the MAX mark and place on its place.
Insert the filter (6) into the holder (12), by
matching the ledge on the filter (6) with the
hole on the holder (12) and turn the filter (6)
clockwise/anticlockwise.
Place the filter holder into the coffee maker.
Holder ledges (12) should match the groves
on the boiler, and then turn the filter holder
handle (8) to the right till the clamp.
Place the corresponding cup on the cover of
the tray (10).
Inset the plug into the socket.
Switch on the unit by pressing the ON/OFF
(17) button, the indicator (16) will light up.
To fill the boiler with water press the (13) but-
ton in 15-20 seconds or when water starts
appearing in the cup, switch off water supply,
by pressing the (13) button once again.
Wait till the indicator (15) lights up, then
switch on water supply, by pressing the (13)
button, when the cup is filled with water,
press the (13) button once again to switch
off water supply, pour out water from the
cup. Depending on the cup size, repeat this
procedure several times, then the boiler will
be washed.
Attention!
- Do not remove the filter holder (12) if the
(13), (14) buttons are pressed
- Do not remove the filter holder (12) imme-
diately after preparing coffee as there is re-
dundant water vapor pressure inside, let the
coffee maker cool down completely.
- To remove the filter holder (12) turn the han-
dle to the left and remove the holder.
MAKING ESPRESSO
Make sure that all functional buttons
(13, 14, 17) are in the off position.
To make sure that the steam supply is
blocked, turn the handle (5) clockwise till
the clamp.
Remove the tank (3), fill it with cold water till
the MAX mark and place on its place.
Insert the filter (6 or 19) into the holder (12),
by matching the ledge on the filter (6) with
the grove on the holder (12) and turn the fil-
ter (6) clockwise/anticlockwise.
Fill the filter (6) with the ground coffee: 2 full
measuring spoons to make two coffee
cups and 1 full spoon - to make one coffee
cup, slightly tamp the ground coffee by the
back side of the measuring spoon (18).
Place the filter holder into the coffee maker.
Holder ledges (12) should match the groves
on the boiler, and then turn the filter holder
handle (8) to the right till the clamp.
Put one or two cups on the tray lid (10).
Inset the plug into the socket.
Switch on the unit by pressing the ON/OFF
(17) button, the indicator (16) will light up.
Wait till the indicator (15) lights up, the unit is
ready for making coffee.
Switch on water supply, by pressing the (13)
button; watch the process of the cup fill-
ing with coffee, press the (13) button once
again to switch off water supply.
Switch off the coffee maker by pressing the
(17) ON/OFF button, the indicator (16) will go
out.
Wait till the coffee maker cools down and
remove the filter holder (12) by turning the
handle to the left. Remove the rest of the
ground coffee and wash the filter (6).
Note:
- The cups should be preliminary heated up,
when water heats up in the boiler, put the
cups on the platform (4).
- When there is an extra need to remove the
filter holder, reduce pressure in the boiler,
switch off the coffeemaker by pressing the
(17) ON/OFF button, put the correspond-
ing cup under the cappuccinator pipe and
slightly open steam supply, by turning the
control (5) anticlockwise, when pressure in
the boiler is reduced, remove the filter hold-
er (12).
4
IM VT-1519.indd 4 08.06.2016 15:36:00

Содержание

Скачать
Случайные обсуждения

Ответы 1

На русский можно перевести
3 года назад