Home
Главная
Vitek
Кофеварка
VT-1519 BK
Инструкция по эксплуатации Страница: 6

Vitek VT-1519 BK [6/32] English

ENGLISH

and the grade of coffee beans grinding. If

coffee is pouring out too long this means the

coffee powder is too fine or it is rammed too

strongly.

REMOVING THE SCALE

For effective operation of the coffee maker we

recommend to remove scale each 2-3 months,

in case of using “hard” water – more often.

1. Make sure that all functional buttons (13,

14, 17) are in the off position.

2. To make sure that the steam supply is

blocked, turn the handle (5) clockwise till

the clamp.

3. Make citric acid solution: 2 teaspoons and

1 l of water and pour this solution into the

water tank (3). Set the tank (3) on its place.

4. Insert the filter (6) into the holder (12), by

matching the ledge on the filter (6) with the

grove on the holder (12) and turn the filter

(6) clockwise/anticlockwise.

5. Place the filter holder into the coffee

maker. Holder ledges (12) should match

the groves on the boiler, and then turn the

filter holder handle (8) to the right till the

clamp.

6. Put a corresponding cup on the lid of the

tray (10).

7. Inset the plug into the socket.

8. Switch on the unit by pressing the ON/OFF

(17) button, the indicator (16) will light up.

9. Press the (13) button and fill a cup of 100

ml with water (it is necessary to remove

water from the boiler and fill the boiler with

citric acid solution), switch off water sup-

ply, by pressing the (13) button once again.

10. Wait till the indicator (15) lights up, and switch

on water supply, by pressing the (13) button

and fill a cup of 100 ml with water, press the

(13) button once again to switch off water

supply, pour out water from the cup.

11. In some time repeat the procedure, de-

scribed in paragraph 10, and fill a cup of

100 ml with water once again.

12. Press the steam supply button (14), wait

till the indicator (15) lights up. Put a cor-

responding cup under the cappuccinator

pipe (7) and open steam supply, by turning

the handle of the control (5) anticlockwise.

Carefully turn the control handle (5) to the

maximal steam supply position, release

steam for about 1 minute, close steam,

by turning the handle (5) clockwise till the

clamp, switch off steam supply, by press-

ing the (14) button.

13. Switch off the coffee maker, by pressing

the (17) button. Wait for 10 - 15 minutes.

14. Make procedures in paragraphs 10 and

11at least 3 times.

15. Repeat cleaning of steam output channels,

described in paragraph 12.

16. With small intervals, repeat the boiler

cleaning procedure (paragraph 10) till cit-

ric acid solution completely resolves in the

tank.

17. Switch on the coffee maker, by pressing

the (17) ON/OFF button.

18. Fill the tank (3) with clear water till the maxi-

mal level and repeat paragraphs 10, 12 at

least 3 times, without 10-15-minute interval.

19. Switch off the coffee maker, by pressing

the (17) ON/OFF button.

Note:

- To remove scale you can use special sub-

stances for scale removal, strictly following

the instructions on their usage.

CLEANING

- Filter cleaning (6): you can wash filter in a

dishwashing machine. If the openings are

blocked with the rest of ground coffee, you

can clean them with a small brush.

- Wipe the housing of the coffee maker with a

damp soft cloth. Do not use metal brushes

and abrasives.

- Do not immerse the unit into water or other

liquids.

- Wash removable parts with warm water and

wipe them with a dry cloth.

Drops tray (9)

- Remove the grid (10) from the tray (9), re-

move the tray (9) and pour out water, put

the tray on its place, put the grid on the

tray. If necessary wash the tray (9) and the

grid (10) in water with soft detergent, rinse

and dry.

IM VT-1519.indd 6 08.06.2016 15:36:00

Vitek VT-1519 BK [6/32] English

Содержание

Похожие устройства