Siemens HB38AB590 [15/40] Automatic switch off

Siemens HB38AB590 [15/40] Automatic switch off
15
Changing the basic settings
Prerequisite: The oven must be switched off.
Example in the picture: changing the audible signal duration
basic setting from medium to short.
1. Press and hold the ± button for roughly 4 seconds until
"Select language:" appears on the left and "English" appears
on the right.
2. Select the basic setting using the rotary selector.
3. Switch to the right-hand settings area using the ¿ button and
change the value using the rotary selector.
4. You can now make further changes to the basic settings by
switching to the basic setting using the
¾ button and making
the adjustments as described under points 2 and 3.
5. Press and hold the ± button until the display disappears. This
takes about four seconds. All changes are saved.
Cancelling
Press the
button. The changes are not applied.
Automatic switch-off
Your oven has an automatic switch-off function. It is activated if
no cooking time is set and the settings have not been changed
for a long time. The point at which this occurs depends on the
temperature or grill setting that has been set.
Switch-off activated
“Automatic switch-off" appears in the display. Operation is
interrupted. Press any button to clear the text. You can make
new settings.
Note: If a cooking time is set, the oven stops heating once the
cooking time has elapsed. The automatic switch-off function is
not necessary.
Cleaning system
The cleaning system regenerates the self-cleaning surfaces in
the cooking compartment.
The self-cleaning surfaces are coated with a highly porous
ceramic layer. This coating absorbs and disintegrates splashes
from baking and roasting while the oven is in operation. If the
surfaces no longer clean sufficiently and dark stains appear,
they can be regenerated with the cleaning system.
Retrofitting the self-cleaning ceiling and side walls
The back wall in the cooking compartment is coated with
ceramic. In order for you to be able to use the cleaning system,
the ceiling and side walls must also be coated. You can obtain
the self-cleaning ceiling and side walls as a special accessory
from the after-sales service.
Changing the basic settings
When you have retrofitted the self-cleaning ceiling and side
walls, you must activate the cleaning system in the basic
settings. To find out how to do this, refer to the Basic settings
section.
Cleaning levels
You can choose from three cleaning levels.
Cleaning system:
No
No
Yes
Setting that specifies whether the appliance is
equipped with a self-cleaning ceiling and side
panels = cleaning system
Telescopic shelf:
No
No
Yes
Setting that specifies whether the appliance is
equipped with telescopic shelves.
Sabbath mode:
No
No
Yes
See the Sabbath mode section
Restore factory settings:
No
No
Yes
Undo all changes and restore basic settings.
Basic setting Options Explanation
 
6HOHFWODQJXDJH
(QJOLVK

%DVLFVHWWLQJ
 
6LJQDOGXUDWLRQ
PHGLXP

%DVLFVHWWLQJ
 
6LJQDOGXUDWLRQ
VKRUW

%DVLFVHWWLQJ
Level Degree of cleaning Duration
1 gentle approx. 45 minutes
2moderate approx. 1 hour
3 intensive approx. 1 hour, 15 minutes

Содержание

Скачать
Случайные обсуждения