Home
Главная
Siemens
Духовой Шкаф
HB38AB590
Инструкция по эксплуатации Страница: 17

Siemens HB38AB590 Инструкция по эксплуатации онлайн [17/40] 26051

Cleaning the self-cleaning surfaces in the cooking

compartment

The back wall in the cooking compartment is coated with a

highly porous ceramic layer. This coating absorbs and

disintegrates splashes from baking and roasting while the oven

is in operation. The higher the temperature and the longer the

oven is in operation, the better the result will be.

If splashes are still visible even after repeated use, proceed as

follows:

1. Clean the floor, ceiling and side panels of the cooking

compartment thoroughly.

2. Set : 3D hot air.

3. With the door closed, heat up the empty oven for

approximately 2 hours at maximum temperature.

The ceramic coating is regenerated. When the cooking

compartment has cooled down, remove the brown or white

residue with water and a soft sponge.

Light discolouration of the coating does not affect automatic

self-cleaning.

If you buy the "self-cleaning ceiling and side panels" optional

accessory at a later stage, you can regenerate the self-cleaning

surfaces with the cleaning system. For this, please see the

Cleaning system section.

Caution!

■ Never use abrasive cleaning agents. You will scratch or

destroy the highly porous coating.

■ Never treat the ceramic coating with oven cleaner. If oven

cleaner accidentally gets onto it, remove it immediately with a

sponge and plenty of water.

Cleaning the cooking compartment floor, ceiling and side

walls

Use a dish cloth and hot soapy water or a vinegar solution.

If there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Detaching the rails

1. Lift up the front of the rail

2. and unhook it (figure A).

3. Then pull the whole rail forward

4. and remove it (Fig. B).

Clean the rails with cleaning agent and a sponge. For stubborn

deposits of dirt, use a brush.

Refitting the rails

1. First insert the rail into the rear socket, press it to the back

slightly (figure A),

2. and then hook it into the front socket (figure B).

The rails fit both the left and right sides. Ensure that, as shown

in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are

above.

Folding down the grill element

You can fold down the grill element to clean the ceiling.

: Risk of burns!

The oven must be cold.

1. Hold the grill element and pull the handle forwards until it

clicks audibly in place (figure A).

2. Fold the grill element downwards (figure B).

3. After cleaning, fold the grill element back up and hold it.

4. Pull the handle downwards until it clicks audibly into place.

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can

detach the oven door.

The oven door hinges each have a locking lever. When the

locking levers are closed (figure A), the oven door is secured in

place. It cannot be detached. When the locking levers are open

in order to detach the oven door (Fig. B), the hinges are locked.

They cannot snap shut.

: Risk of injury!

Whenever the hinges are not locked, they snap shut with great

force. Ensure that the locking levers are always fully closed or,

when detaching the oven door, fully open.









Siemens HB38AB590 Инструкция по эксплуатации онлайн [17/40] 26051

Содержание

Похожие устройства