Главная
Skipped breadcrumb items
SG1251J
Инструкция по эксплуатации Страница: 9

Главная
Makita
SG1251J
Инструкция по эксплуатации Страница: 9

Makita SG1251J — инструкция по эксплуатации и обслуживанию инструмента для резки [9/60]

Превью страниц Страница 9 / 60

NOTE:

• When the handle cannot be moved easily, loosen the

bolts furthermore.

Shifting the front handle sideways (Fig. 12)

Remove the two bolts on both sides of the front handle

with the hex wrench. Change the position of the cam.

Insert the longer bolt to the side close to the cam and the

shorter one to the opposite side. Tighten the two bolts

firmly.

Connecting to vacuum cleaner (Fig. 13)

When using Makita dust collector, connect the hose for

the vacuum cleaner directly to the dust nozzle.

NOTE:

• The dust nozzle can be rotated freely so that you can

use it at any angle according to your operation.

Hex wrench storage (Fig. 14)

When not in use, store the hex wrench to keep it from

being lost.

OPERATION

CAUTION:

• Be sure to pull the tool when cutting a workpiece.

• Use this tool for straight line cutting only. Cutting curves

can cause stress cracks or fragmentation of the

diamond wheels resulting in possible injury to persons

in the vicinity.

• After operation, always switch off the tool and wait until

the diamond wheels come to a complete stop before

putting the tool down.

• Hold the tool firmly with one hand on the switch handle

and the other hand on the front grip when performing

the tool.

Hold the tool firmly with both hands. First keep the

diamond wheels without making any contact with a

workpiece. Then turn the tool on and wait until the

diamond wheels attain full speed. (Fig. 15)

To cut a workpiece, pull the tool toward you (not by

pushing away from you). Align the notch on the base with

your cutting line. Push down the front handle gently until

it stops and then pull the tool slowly. (Fig. 16)

Before finishing cutting operation and raising the tool,

switch it off first. Wait until the diamond wheels stop

completely and then raise the tool.

Remove the remaining portion between the two blade

passages by other appropriate tools.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

The tool and its air vents have to be kept clean. Regularly

clean the tool’s air vents or whenever the vents start to

become obstructed. (Fig. 17)

Dressing diamond wheel

If the cutting action of the diamond wheel begins to

diminish, use an old discarded coarse grit bench grinder

wheel or concrete block to dress the diamond wheel. To

do this, tightly secure the bench grinder wheel or

concrete block and cut in it.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other

maintenance or adjustment should be performed by

Makita Authorized Service Centers, always using Makita

replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Diamond wheels

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ from

country to country.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

): 97 dB (A)

Sound power level (L

): 108 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: concrete cutting

Vibration emission (a

): 5.0 m/s

Uncertainty (K): 1.5 m/s

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of exposure in

the actual conditions of use (taking account of all parts

of the operating cycle such as the times when the tool

is switched off and when it is running idle in addition to

the trigger time).

Makita SG1251J — инструкция по эксплуатации и обслуживанию инструмента для резки [9/60]

Содержание

Похожие устройства