Home
Главная
Gorenje
Увлажнитель Воздуха
H50DW
Инструкция по эксплуатации Страница: 26

Gorenje H50DW [26/68] Functional panel with lcd

you will see on the display red icon with word

»power«.

9. For turning on and off your appliance you must

push ON/OFF button on the functional panel

of the humidifier.

When your appliance is switched on you can

choose among three modes of working

(SLEEP, INTELLIGENT, STANDARD).

A more detailed explanation is below.

Warning: When using your humidifier for the first

time, place it in the room temperature for at

least half an hour.

Tip: Replace water in the reservoir every day in

order to prevent formation of bacteria in it.

10. After switching off remove the plug from the

wall socket.

11. Empty the reservoir and base. If you are not

going to use the humidifier for two or more

days, wipe it with a cloth.

Functional panel with LCD

 “ON/OFF” button:

When you press button for switching ON/OFF the

appliance will automatically start working (in

standard mode, the intensity of humidifying is on

medium).

The display lights up blue icon STANDARD

(standard mode). The % in orange show the

relative humidity in the room. Intensity of spraying

mist is shown by blue columns.

 “TIMER/ANION” button:

By pressing this button you can ajust time when

the appliance will be turned off automatically.

Press this key to adjust the time:

Each time you press button, the timer will increase

for 1h. If there is no operation for 5 seconds, the

timer starts with timer indicator on.

Max. setting time for timer is 12 hours.

When pressing and holding this button for 2-3

seconds, you will turn on/off ionizer. Ionization is

process of producing negative ions which are

called anions. When this function is activated, the

display lights up blue icon labeled "anion".

 “HUMIDITY” button:

With that button you are setting required relative

humidity (RH) in a room. Humidity is adjusted from

40-80%. It displays “oL” (means without setting)

when humidity is not set. Each time you press the

button humidity increases for 10%.

If there is no operation for 5 seconds, humidity

setting will be off.

When your set relative humidity in room is

reached, the appliance will automatically reduces

intensity of spraying. In that case, the setting of

intensity is not possible. When relative humidity in

room is lower than being set, appliance will start

working as intensity of humiditying has been set

before.

 Button & sliding bar “─…..+”:

With this button you are setting intensity of

humidifying. You can choose among six levels of

spraying. When pressing – you decreae spraying

of mist, when pressing + you increase spraying.

Instead of pressing + or – you can slide on the

control bar with a finger. Left for decreasing and

right for increasing intensity.

Intensity of humidifying can be operated under all

three modes.

 “MODE” button:

You can choose between three modes of working.

These are STANDARD, INTELLIGENT in SLEEP.

By pressing this button you follow all three modes.

“standard” mode;

This is default mode. You set the intensity of

spraying and also relative humidity in room. The

same is for functions of timer and ionization.

“intelligent” mode;

Your humidifier operates at a pre-set humidity

under that mode. It is 40-60% RH. When relative

humidity in room is at least 60%, appliance

Gorenje H50DW [26/68] Functional panel with lcd

Содержание

Похожие устройства