Hallde RG-50 [5/33] Technical specification halide rg 50
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hallde RG-50 [5/33] Technical specification halide rg 50

Set the speed control to the “I” position, raise
the feeders handle and check that the shaft
(A14) stops rotating within two seconds.
Remove the power supply plug from the wall
socket, alternatively turn off the mains switch
and then check that the electrical cable is in
good condition and has no cracks.
If the electrical cable is worn or damaged or
shows signs of cracking, or if any of the above
safety functions are not in good working order,
a service mechanic should be called in to make
repairs before the machine is taken back into
operation.
That the rubber feet of the machine are firmly
screwed into position.
That the knives and cutting tools are whole and
sharp.
Trouble shooting.
To eliminate the risk of damage to the motor,
the RG-50 is fitted with thermal motor
protection that automatically switches off the
machine if the temperature of the motor should
become to high. The thermal motor protection
has automatic reset, which means that the
machine can be started again when the motor
has cooled down, which usually takes between
10 and 30 minutes.
FAULT: The machine will not start or stops while
running and can not be re-started.
ACTION: Check that the power plug is
properly inserted in the wall socket or,
alternatively, set the mains switch to the “I”
position. Check that the fuses in the wall box for
the premises have not blown and have the
correct ampere rating. Check that the feeder
(A5) is correctly fitted and that the feeders
handle (A3) has been lowered. Wait for up to
30 minutes and then try to start the machine
again. Call in a service mechanic for action.
FAULT: Low capacity or poor processing result.
ACTION: Select the right cutting tool (A6-A12).
Always use the ejector plate (A13). Check that
the knives and cutting tools are whole and
sharp. Press the food down losely.
FAULT: The cutting tool cannot be removed
when using the feeder (A5).
ACTION: Always use the ejector plate (A13).
Use a thick leather glove or other glove that the
blades of the cutting tool cannot cut through
and remove the cutting tool by turning it
clockwise.
Technical specification Hallde RG-50.
TYPE OF PROCESSING: Slices, dices, shreds,
and/or grates fruit, vegetables, dry bread,
cheese, nuts and mushrooms. USERS:
Restaurants, shop kitchens, diet kitchens, day
care centres, retirement homes, catering
establishments, etc. preparing from 10 to 80
portions a day.
CAPACITY AND VOLUME: Processes up to 2
kg. per minute depending on the type of
cutting tool and foods. Volume of the feeder:
0.9 litres. Diameter of the feed tube: 53 mm.
MACHINE BASE: Motor: 250 W. 120 V, single
phase, 60 Hz. 220-240 V, single phase, 50/
60 Hz. Thermal motor protection. Transmission:
Maintenance free toothed belt. Safety system:
Two safety switches. Degree of protection:
IP34. Power supply socket: Earthed, single
phase, 10 A. Fuse in fuse box for the premises:
10 A, delayed. Sound level: LpA (EN31201): 76
dBA. Magnetic field: Less than 15 microtesla.
Speed: One speed. Approx. 400 rpm.
CUTTING TOOLS The diameter of the cutting
tools is 185 mm. MATERIALS: Machine base of
aluminium. Feed head of polycarbonate. Ejector
plate of acetal. Cutting tool discs of robust
acetal, polyproene or aluminium. Cutting tool
blades of knife steel of the highest quality. NET
WEIGHTS: Machine base: 12 kg. Feed head: 1
kg. Cutting tools: approx. 0.4 kg average.
NORMS: EU Machinery Directive 89/392/
EEC and EMC Directive 89/336/EEC.

Содержание

Похожие устройства

Set the speed control to the F position raise the feeders handle and check that the shaft A14 stops rotating within two seconds Remove the power supply plug from the wall socket alternatively turn off the mains switch and then check that the electrical cable is in good condition and has no cracks If the electrical cable is worn or damaged or shows signs of cracking or if any of the above safety functions are no tin good wo iking older a service mechanic should be called in to make repairs before the machine is taken backinto operation That the rubber feet of the machine are firmly screwed into position That the knives and cutting tools are whole and shaip Troubleshooting Tb eliminate the risk of damage to the motor the RG 50 is fitted with thermal motor protection that automatically switches off the machine if the temperature of the mo tor should become to high The thermal motor protection has automatic reset which means that the machine can be started again when the motor has cooled down which usually takes between 10 and 30 minutes FAULT The machine will not start or stops while running and can not be re started ACTION Check thatthe power plug is properly inserted in the wall socket or alternatively setthe mains switch to the F position Check thatthe fuses in the wall box for the premiseshave not blown and have the correct ampere rating Check that the feeder A5 is correctly fitted and thatthe feeders handle A3 has been lowered Waitforup to 30 minutes and then try to start the machine again Call in a service mechanic for action FAUIT low capacity orpoorprocessing result ACTION Select the rightcutting tool A6A12 Always use the ejector plate A13 Check that the knives and cutting tools are whole and sharp lYess the fo od do wn lo sely FAULT The cutting tool cannot be removed when using the feeder A5 ACTION Always use the ejector plate A13 Use a thick leather gio ve or other glove thatthe blades of the cutting tool cannot cut thro ugh and remove the cutting tool by turning it clockwise Technical specification Halide RG 50 TYPE O F FRO C ESSIN G Slic e s die e s shre ds and or grates fruit vegetables dry bread cheese nuts and mushrooms USERS Restaurants shop kitchens diet kitchens day care centres retirement homes catering establishments etc preparing from 10 to 80 portions a day CAPACITY AND VO IUME Hoc esse sup to 2 kg per minute depending on the type of cutting tool and foods Volume of the feeder 0 9 litres Diameter of the feed tube 53 mm MACHINE BASE Motor 250 W 120 V single phase 60 Hz 220 24 0 V single phase 50 60 Hz Thermal motor protection Transmission Maintenance free toothed belt Safety system T vo safety switches Degree of protection IR34 Riwersupply socket Earthed single phase 10 A Fbse in fuse box for the premises 10 A delayed Sound level IpA EN31201 76 dBA Magnetic field less than 15 micro tesla Speed One speed Approx 400 ipm CUTTIN G TO O IS The diameter of the cutting toolsis 185 mm MATERIAIS Machine base of aluminium Feed head of polycaibonate Ejector plate of acetal Cutting tool discs of robust acetal polyproene or aluminium Cutting tool blades of knife steel of the highest quality NET WEIGHTS Machine base 12 kg Fbed head 1 kg Cutting tools approx 0 4 kg average NORMS EU Machinery Directive 89 392 EEC and EMC Directive 89 336 EEC

Скачать