La Nordica Fly Idro D.S.A белая [25/64] Cleaning the fireplace

La Nordica Fly Idro D.S.A белая [25/64] Cleaning the fireplace
FLY IDRO DSA
7193505 - IT-EN-DE-FR 25
12. CALCULATION OF THE THERMAL POWER
There is not an absolute rule for calculating the correct necessary power. This power is given according to the space to be heated, but it
depends also largely on the insulation. On an average, the caloric value necessary for a properly insulated room is 30 kcal/h per m
3
(for
an external temperature of 0°C).
Given that 1 kW corresponds to 860 kcal/h, it is possible to adopt a value of 38 W/m
3
.
Let’s suppose one wishes to heat a room of 150 m
3
(10 x 6 x 2.5 m) in an insulated apartment. In this case, it is necessary to have 150 m
3
x 38 W/m
3
= 5700 W or 5,7 kW. As main heating, a 8 kW device is therefore sufcient.
Approximate combustion value Required quantity in relation to 1 kg of dry
wood
Fuel Unit kcal/h kW
Dry wood (15% humidity) kg 3600 4.2 1,00
Wet wood (50% humidity) kg 1850 2.2 1,95
Wood briquettes kg 4000 5.0 0,84
Brown coal briquettes kg 4800 5.6 0,75
Normal anthracite kg 7700 8.9 0,47
Coke kg 6780 7.9 0,53
Natural gas m
3
7800 9.1 0,46
Naphtha L 8500 9.9 0,42
Electricity kW/h 860 1.0 4,19
11.10. MAINTENANCE ON THE WATER SYSTEM
Excessive incrustation deposits on the inner walls of the hearth considerably reduce the efciency of heat exchange; therefore, remove
these deposits using a steel brush whenever necessary. Never use corrosive substances that can damage the thermo-replace and
the boiler.
With the system switched off, once a year carry out the following checks:
Check the operation and efciency of the blowdown and safety valves. If they are defective, contact your authorised installer. IT IS
STRICTLY FORBIDDEN TO REMOVE OR TAMPER WITH THE SAFETY DEVICES.
Check the thermal insulation of the lling pipe and the safety pipe.
Make sure that the system is lled and under pressure, checking the water level in the expansion tank; also check that it is working
properly and check the efciency of the safety pipe.
11.9. CLEANING THE FIREPLACE
During cleaning remove the top cap of the replace which is located on the exhaust fumes pos. B Picture 9 at page 56 (the rst time by the
help of a hammer as indicated in to the picture).
ATTENTION: when you remove the cap and the top lock steel plate of the replace, the dirtiness that is inside the chamber of exhaust
fumes falls down, therefore avoid to dirty the inside of the replace.
When the cleaning is completed: - put the top cap of the replace into its place (B). You have to support the cap to the wall above the
replace by passing it through the corresponding slots (C) and then, with a rotary movement of the hand, send the screws at the machined
seats into the wall (D) and leave the cap as support on the upper wall.
ATTENTION: The absence of the cap (B) and the top lock steel plate of the replace (E) causes a strong depression, leading to
excessively fast combustion and excessive wood consumption, with consequent overheating of the appliance, forge effect,
and decreases the heat discharge of the boiler.

Содержание

Похожие устройства

Скачать