Beko CSE 57300 GW [11/84] A danger

Содержание

Do not install the appliance next to 1 Jrefrigerators or freezers The heat emitted by the appliance will lead to an Increased energy consumption of cooling appliances Carry the product with at least two persons Product must be placed directly on the floor It must not be placed onto a base or a pedestal ___________________________ e Material damage 1 jThe door and or handle must not be used i i for lifting or moving the appliance Electrical connection Connect the product to a grounded outlet line protected by a fuse of suitable capacity as stated in the Technical specifications table Have the grounding installation made by a qualified electrician while using the product with or without a transformer Our company shall not be liable for any damages that will arise due to using the product without a grounding installation in accordance with the local regulations A DANGER Risk of electric shock Before starting any work on the electrical installation please disconnect the appliance from the mains supply Connecting the power cable 1 If it is not possible to disconnect all poles in the supply power a disconnection unit with at least 3 mm contact clearance fuses line safety switches contactors must be connected and all the poles of this disconnection unit must be adjacent to not above the product in accordance with IEE directives Failure to obey this instruction may cause operational problems and invalidate the product warranty Additional protection by a residual current circuit breaker is recommended DANGER Risk of electric shock short circuit or fire by unprofessional Installation The appliance may be connected to the mains supply only by an authorized qualified person and the appliance is only guaranteed after correct installation A DANGER Risk of electric shock short circuit or fire by damage of the mains lead The mains lead must not be clamped bent or trapped or come into contact with hot parts of the appliance If the mains lead Is damaged It must be replaced by a qualified electrician The mains supply data must correspond to the data specified on the type label of the product The rating plate is either seen when the door or the lower cover is opened or it is located at the rear wall of the unit depending on the unit type Power cable of your product must comply with the values in Technical specifications table 2 For single phase connection connect as identified below Brown cable L Phase Blue cable N Neutral Green yellow cable E Ground Push the product towards the kitchen wall Adjusting the feet of oven Vibrations during use may cause cooking vessels to move This dangerous situation can be avoided if the product is level and balanced For your own safety please ensure the product is level by adjusting the four feet at 10 EN