Trotec Speedy 300 [20/60] Electrical requirements

8011 Trotec Speedy 300

BEFORE OPERATION

28/07/2015 Trotec Laser GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support 20 / 60

tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto: techsupport@troteclaser.com

3.4 Electrical – Requirements

Make sure that your electrical outlet is capable of providing the proper

voltage, frequency and amperage that the laser system requires.

We recommend having individual circuits for

Lasermachine and PC

Extractor

Recommended fuse: compare “Electricity, Power, Fuse” in section “1.4

Technical Data / Device Specification”.

Please install your computer to the same circuit as the laser marker to

prevent electromagnetic interactions.

DAMAGES FROM AN INADEQUATE OR INAPPROPRIATE POWER

SOURCE ARE NOT COVERED UNDER WARRANTY.

Noisy or unstable electricity as well as voltage spikes can cause interference

and possible damage to the electronics of the laser system. It is better to

connect the laser system to a dedicated electrical line.

It is highly recommended that you use a surge suppression plugs to protect

your computer equipment.

If electrical power fluctuations, brown outs or constant power outages are a

problem in your area, an electrical line stabilizer, UPS (Uninterruptible Power

Supply) or backup generator might be required. If installing any of these

devices, make sure that they meet the electrical requirements of the laser

system.

It is your responsibility to provide a suitable electrical supply.