![Brother PJ-673 [15/75] Printing from an ios device via a wireless lan connectio](/img/pdf.png)
Brother PJ-673 [15/75] Printing from an ios device via a wireless lan connectio
![Brother PJ-673 [15/75] Printing from an ios device via a wireless lan connectio](/views2/1471110/page15/bgf.png)
Setting Up the Printer
11
1
Connecting the Printer
and iOS Device
1
NOTE
• This printer can establish a connection
with the “Open System” authentication
method and when the encryption method
is set to “None” or the “WEP” ad-hoc
mode.
• While connected to this printer in ad-hoc
mode, Wi-Fi cannot be used to connect
to the Internet. In addition, when the iOS
device enters sleep mode, the connection
between the printer and iOS device will
be cut.
Printing From an iOS Device
Via a Wireless LAN Connection1
The default printer settings are listed below.
It may be useful to first print a report of the
printer settings as described in Printing a
Printer Report on page 59.
SSID (network name): PJ-673_XXXX (where
“XXXX” is the last four digits
of the printer’s
serial number)
Encryption method: WEP
WEP key: Last five digits
of the printer’s
serial number
IP address: 169.254.100.1
Subnet mask: 255.255.0.0
NOTE
The serial number appears as “SER. NO.
XXXXXX-XXXXXXXXX” on the back of
the printer.
Connecting the Printer
(With the Default Settings)
1
Follow this setup method when using the
printer’s factory default settings to connect an
iOS device. To change the printer settings,
see Setting Up the Printer (With the Default
Settings Changed) on page 12.
In addition, if the printer’s wireless LAN
settings are changed, even after they had
already been specified, the connection
between the iOS device and the printer must
be re-established.
a Turn on the printer.
b Check that the POWER indicator is lit,
and then hold down (at least 3 seconds)
the (Power) button to enter wireless
LAN mode. Check that the WIRELESS
LAN indicator is blinking. For details,
see Switching Between Wireless LAN
Mode and USB Mode on page 30.
c Start Settings on the iOS device.
d Select .
If is set to [Off], change it to [On].
e A list of Wi-Fi networks (SSID) that can
be joined appears.
To establish a connection, tap the
printer’s default network (SSID) so that
a checkmark appears beside the
network (SSID). For the password, type
in the default WEP key (last five digits
of the serial number). It will take time for
the iOS device to search for the SSID
and display it. If it is not displayed, set
Wi-Fi to [Off], then to [On] again.
When printing from an iOS device,
printing software created by a software
developer will be needed in addition
to the product and services that we
provide. (We provide an SDK that can
be used.) Consult with a software
developer for printing software for the
iOS device.
Содержание
- User s guide p.1
- Pj 673 mobile printer p.1
- Symbols used in this document p.2
- Introduction p.2
- About this document p.2
- Setting up the printer 1 p.3
- Using the printer 28 p.3
- Table of contents p.3
- Troubleshooting 60 p.4
- Technical information 66 p.4
- Reference 55 p.4
- Maintaining the printer 53 p.4
- Brother pj 673 utility 40 p.4
- A character sets 68 p.4
- Setting up the printer p.5
- Power sources and their installation p.5
- General description p.5
- Connecting to an ac power socket optional p.6
- Connecting to a dc power socket optional p.6
- Connecting the printer to external power p.6
- Using the rechargeable ni mh battery optional p.7
- Installing the rechargeable ni mh battery p.7
- Charging the rechargeable ni mh battery p.8
- Tips on using the rechargeable ni mh battery p.9
- Stopping rechargeable ni mh battery charging p.9
- If the printer will not be used for a long period of time p.9
- Explaining battery terms p.9
- Using the rechargeable li ion battery optional p.10
- Installing the rechargeable li ion battery p.10
- Charging the rechargeable li ion battery p.11
- Tips on using the rechargeable li ion battery p.12
- Rechargeable li ion battery characteristics p.13
- If the printer will not be used for a long period of time p.13
- The characteristics of the two types of rechargeable batteries that can be used with the printer are described in the following table p.14
- Since it is necessary for the rechargeable ni mh battery to be trickle charged regularly connect a power supply ac adapter and ac power cord or car adapter since frequently charging the rechargeable li ion battery will shorten its service life try to charge it only after it has been fully discharged p.14
- Rechargeable battery overview p.14
- Printing from an ios device via a wireless lan connectio p.15
- Connecting the printer and ios device p.15
- Setting up the printer with the default settings changed p.16
- Connecting the printer with the default settings changed p.18
- Printing from a window p.19
- Connecting the printer and a window p.19
- Computer via a wireless lan connection p.19
- Computer p.19
- Setting up the printer with the default settings p.20
- Setting up the computer running window p.21
- Adding a printer p.23
- Setting up the printer with the default settings changed p.26
- Setting up the computer running window p.28
- Via a usb connection p.29
- Printing from a computer running window p.29
- Uninstall the printer driver p.30
- Power button and feed button functions p.32
- Operation panel p.32
- Using the printer p.32
- The indicators light and flash to indicate the printer s status each indicator may light or blink in green red orange or blue for details see indicators on page 55 p.33
- Rechargeable li ion battery is not controlled by these functions p.33
- Indicators p.33
- Switching between wireless lan mode and usb mode p.34
- Connecting the ios device to a separate wireless network than the one connected to the printer p.35
- Connecting a window p.35
- Computer to a separate wireless network than the one connected to the printer p.35
- Changing the ios device s settings p.35
- Updating the software p.37
- Printing solutions p.37
- Printing p.37
- Making prints lighter or darker p.38
- Paper type p.39
- Page feed mode p.39
- Density p.39
- Setting printer driver options p.39
- Ply mode p.39
- Roll paper pause p.40
- No feed mode extra feed p.40
- Feed position for custom paper p.40
- Dash line print p.40
- Automatically switch command mode p.40
- Setting paper size p.41
- Selecting paper type p.42
- Perforated roll paper p.42
- Non perforated roll paper p.42
- Cut sheet paper p.42
- Usage and handling instructions p.43
- Tips on using paper p.43
- Cutting roll paper p.43
- Clearing a paper jam p.43
- Using genuine brother thermal paper p.43
- Overview p.44
- Installing brother pj 673 utility p.44
- Brother pj 673 utility p.44
- Uninstalling the pj 673 utility p.45
- Using pj 673 utility p.46
- Starting the pj 673 utility p.46
- How to use the pj 673 utility p.46
- Before using the pj 673 series utility p.46
- The parameters which are common to all operating systems include auto power on auto power off and pre feed p.47
- Parameters p.47
- Most users will not need to change these settings of pj 673 utility generally they are relevant only when printing simple text data from a computer that does not have this printer s driver installed p.47
- Changing parameter settings p.47
- Defining paper size p.48
- 3 4 5 6 p.48
- Defining power and roll paper options p.50
- Defining print density and other options p.52
- 2 3 4 5 p.52
- Defining internal font settings p.54
- 2 3 4 5 p.54
- Pj 673 utility menu p.55
- Maintaining the printer p.57
- Cleaning the platen roller p.57
- Cleaning the printer s exterior p.58
- Reference p.59
- Indicators p.59
- Wireless lan indicator p.60
- Indicator warnings p.61
- For errors not described above see the next chapter troubleshooting on page 60 p.62
- Printing a printer report p.63
- Troubleshooting p.64
- Overview p.64
- Printed image problems p.65
- Paper problems p.65
- Pages don t print p.68
- Pages are partially printed p.69
- Technical information p.70
- Product specifications p.70
- Extended graphics character table p.72
- Character sets p.72
- Character code tables p.72
- Italic character table p.73
- International character set table p.74
Похожие устройства
-
Brother PJ-723Интерактивное руководство пользователя -
Brother PJ-723Справочник по языку команд Brother ESC -
Brother PJ-723Руководство по шаблонам P_touch -
Brother PJ-723Справка по растровым командам -
Brother PJ-723Справочник по устаревшему языку команд ESC -
Brother RJ-4040Краткий справочник -
Brother RJ-4040Руководство по безопасности устройства -
Brother RJ-4040Руководство по использованию AirPrint -
Brother RJ-4040Руководство по использованию программного обеспечения -
Brother RJ-4040Руководство пользователя по работе в сети -
Brother RJ-4040Руководство пользователя -
Brother RJ-4030Краткий справочник