Tp-Link T1700X-16TS V3 [174/468] Command mode

Tp-Link T1700X-16TS V3 [174/468] Command mode
Example
Enable MVR for port 1/0/1:
T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/1
T1700X-16TS(config-if)#mvr
19.7 mvr type
Description
The mvr type command is used to configure the MVR port type as receiver or
source. By default, the port is a non-MVR port. If you attempt to configure a
non-MVR port with MVR characteristics, the operation fails. To return to the
default configuration, please use no mvr type command.
Syntax
mvr type { source | receiver }
no mvr type
Parameter
source —— Configure the uplink ports that receive and send multicast data
on the multicast VLAN as source ports. Source ports should belong to the
multicast VLAN.
receiver —— Configure the ports that are connecting to the hosts as receiver
ports. A receiver port can only belong to one VLAN, and cannot belong to the
multicast VLAN.
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet / interface range
ten-gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the port 1/0/3 as a receiver port:
T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/3
T1700X-16TS(config-if)#mvr type receiver
153

Содержание

Похожие устройства

Скачать