Tp-Link T1700X-16TS V3 [345/468] Command mode

Tp-Link T1700X-16TS V3 [345/468] Command mode
pap: EAP termination mode. IEEE 802.1x authentication system uses
extensible authentication protocol (EAP) to exchange information between
the switch and the client. The EAP packets are terminated at the switch and
repackaged in the Password Authentication Protocol (PAP) packets, and then
transferred to the RADIUS server.
eap: EAP relay mode. IEEE 802.1x authentication system uses extensible
authentication protocol (EAP) to exchange information between the switch
and the client. The EAP protocol packets with authentication data are
encapsulated in the advanced protocol (such as RADIUS) packets and
transmitted to the authentication server.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the Authentication protocol of IEEE 802.1x as “pap”:
T1700X-16TS(config)#dot1x auth-protocol pap
37.4 dot1x vlan-assignment
Description
The dot1x vlan-assignment command is used to enable the VLAN
assignment feature.To disable this feature, please use no dot1x
vlan-assignment command.
802.1x VLAN assignment is a technology allowing the RADIUS server to send
the VLAN assignment to the port when the port is authenticated.
If the assigned VLAN does not exist on the switch, the switch will create the
related VLAN automatically, add the authenticated port to the VLAN and
change the PVID based on the assigned VLAN.
If the assigned VLAN exists on the switch, the switch will directly add the
authenticated port to the related VLAN and change the PVID instead of
creating a new VLAN.
If no VLAN is supplied by the RADIUS server or if 802.1x authentication is
disabled, the port will be in its original VLAN after successful authentication.
324

Содержание

Похожие устройства

Скачать