Tp-Link T1700X-16TS V3 [279/468] Show qos cos map

Tp-Link T1700X-16TS V3 [279/468] Show qos cos map
sp —— Strict-Priority Mode. In this mode, the queue with higher priority will
occupy the whole bandwidth. Packets in the queue with lower priority are sent
only when the queue with higher priority is empty.
wrr
—— Weight Round Robin Mode. In this mode, packets in all the queues
are sent in order based on the weight value for each queue. If you select this
mode, you need to specify the queue weight at the same time.
weight
—— Configure the weight value of the specified TC queue. When the
scheduler mode is specified as WRR, the weight value ranges from 1 to 127.
The 8 queues will take up the bandwidth according to their ratio.
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet / interface range
ten-gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the Scheduler Mode of TC1 as WRR and set the queue weight as 10
for port 1/0/1:
T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/1
T1700X-16TS(config-if)# qos queue 1 mode wrr weight 10
28.9 show qos cos-map
Description
The show qos cos-msp command is used to display the 802.1p priority to TC
queue mappings.
Syntax
show qos cos-map
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the 802.1p to queue mappings:
T1700X-16TS# show qos cos-map
258

Содержание

Похожие устройства

Скачать