Tp-Link T1700X-16TS V3 [284/468] Chapter 29 bandwidth control commands

Tp-Link T1700X-16TS V3 [284/468] Chapter 29 bandwidth control commands
Chapter 29 Bandwidth Control Commands
Bandwidth Control functions to control the traffic rate and traffic threshold on each port to
ensure network performance. Rate limit functions to limit the ingress/egress traffic rate on
each port. Storm Control function allows the switch to monitor broadcast packets, multicast
packets and Unknown unicast frames in the network.
29.1 storm-control rate-mode
Description
The storm-control rate-mode command is used to configure the storm
control mode of the interface. To return to the default configuration, please
use no storm-control rate-mode command.
Syntax
storm-control rate-mode { kbps | ratio | pps }
no storm-control rate-mode
Parameter
kbps —— The switch will limit the maximum speed of the specific kinds of
traffic in kilo-bits per second.
ratio —— The switch will limit the percentage of bandwidth utilization for
specific kinds of traffic.
pps —— The switch will limit the maximum number of packets per second for
specific kinds of traffic.
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet / interface range
ten-gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
This command should be used along with the storm-control command to
enable the storm control function and specify the detailed parameters.
Example
Set the storm control mode as kbps on port 1/0/5:
T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/5
263

Содержание

Похожие устройства

Скачать