Tp-Link T1700X-16TS V3 [96/468] Loopback detection recover

Tp-Link T1700X-16TS V3 [96/468] Loopback detection recover
on which the loop is detected and no packets can pass through the port.
vlan-based
——
When a loop is detected, the switch will send a trap message
and generate an entry on the log file. In addition, the switch will block the
VLAN in which the loop is detected and only the packets of the blocked VLAN
cannot pass through the port.
auto —— Block status can be automatically removed after recovery time.
manual —— Block status can only be removed manually.
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet | interface range
ten-gigabitEthernet | interface port-channel | interface range port-channel )
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the loopback detection process-mode as port-based, and
configure the recovery mode as manual for port 2:
T1700X-16TS(config)# interface ten-gigabitEthernet 1/0/2
T1700X-16TS(config-if)# loopback-detection config process-mode
port-based recovery-mode manual
10.6 loopback-detection recover
Description
The loopback-detection recover command is used to remove the block
status of selected ports, recovering the blocked ports to normal status,
Syntax
loopback-detection recover
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet | interface range
ten-gigabitEthernet | interface port-channel | interface range port-channel )
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Recover the blocked port 1/0/2 to normal status:
75

Содержание

Похожие устройства

Скачать