Tp-Link T1700X-16TS V3 [402/468] Ip dhcp filter decline rate

Tp-Link T1700X-16TS V3 [402/468] Ip dhcp filter decline rate
45.5 ip dhcp filter decline rate
Description
The ip dhcp filter decline rate command is used to enable the Decline
Protect feature and configure the rate limit on DHCP Decine packets. The
excessive DHCP Decline packets will be discarded. To disable the Decline
Protect feature, please use no ip dhcp filter decline rate command.
Syntax
ip dhcp filter decline rate
value
no ip dhcp filter decline rate
Parameter
value
—— Specify the rate limit of DHCP Decline packets, and the optional
values are 0, 5, 10, 15, 20, 25 and 30 (units:packet/second). It default value is
0, which stands for “disable”.
Command Mode
Interface Configuration Mode (interface ten-gigabitEthernet / interface range
ten-gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the rate limit of DHCP Decline packets as 20 packets per second
on Port 1/0/2:
T1700X-16TS(config)#interface ten-gigabitEthernet 1/0/2
T1700X-16TS(config-if)#ip dhcp filter decline 20
45.6 ip dhcp filter server permit-entry
Description
The ip dhcp filter server permit-entry command is used to add entry for the
legal DHCP server. To restore to the default option, please use no ip dhcp
snooping information strategy command.
381

Содержание

Похожие устройства

Скачать