Tp-Link T1700X-16TS V3 [369/468] Command mode

Tp-Link T1700X-16TS V3 [369/468] Command mode
priority
——
The user priority ranges from 0 to 7. The default is No Limit.
source-ip:
Enter the source IP address.
source-ip-mask
——
Enter the mask of the source IP address. It is required if
source IP address is entered.
destination-ip
——
This is required if a source IP address is entered.
destination-ip-mask
——
Enter the destination IP address mask. This is
required if a destination IP address is entered.
dscp-value
——
Specify the DSCP value between 0 and 63.
tos-value
——Specify an IP ToS value to be matched between 0 and 15.
pre-value
——Specify an IP Precedence value to be matched between 0 and
7.
protocol
——
Specify a protocol type.
s-port-number
——
Specify the source port number.
s-port-mask
——
Specify the source port mask with 4 hexadecimal numbers.
d-port-number —— Specify the destination port number.
d-port-mask
——
Specify the destination port mask with 4 hexadecimal
numbers.
tcpflag
——
For TCP protocol, specify the flag value using either binary
numbers or * (for example, 01*010*). The default is *, which indicates that the
flag will not be matched. The flags are URG (Urgent flag), ACK (acknowledge
flag), PSH(push flag), RST(reset flag),SYN(synchronize flag), and FIN(finish
flag).
time-range-name
—— The name of the time-range. The default is No Limit.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create Combined ACL 1100 and configure Rule 1 to deny packets with
source IP address 192.168.3.100 in VLAN 2:
T1700X-16TS(config)# access-list create 1100
T1700X-16TS(config)# access-list combined 1100 logging disable rule 1
permit vid 2 sip 192.168.3.100 sip‑mask 255.255.255.255
348

Содержание

Похожие устройства

Скачать