Tp-Link T1700X-16TS V3 [373/468] S condition

Tp-Link T1700X-16TS V3 [373/468] S condition
Example
Define the policy to redirect the matched packets to port 1/0/1 for rule 1 of
ACL 6:
T1700X-16TS(config)# access-list action 6 rule 1
T1700X-16TS(config-action)# redirect interface ten-gigabitEthernet 1/0/1
40.9 s-condition
Description
The s-condition command is used to limit the rate of the matched packets.
To restore the settings to the defaults, please use no s-condition.
Syntax
s-condition rate
rate
burst
burst-size
osd { none | discard
}
no s-condition
Parameter
rate
—— Specify a rate, ranging from 0 to 1000000kbps.
burst-size
—— Specify the number of bytes allowed in one second ranging
from 1 to 128.
osd ——Select either “none” or “discard” as the action to be taken for the
packets whose rate is beyond the specified rate. The default is None.
Command Mode
Action Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure a policy for rule 1 of ACL 6: limit the transmission rate of the
matched packets as 1000 Kbps and if the number of bytes per second is
beyond 100, the packets will be discarded by the switch:
T1700X-16TS(config)#access-list action 6 rule 1
T1700X-16TS(config-action)# s-condition rate 1000 burst 100 osd discard
352

Содержание

Похожие устройства

Скачать