Neff C57W40N3 [28/72] Malfunction table

Neff C57W40N3 [28/72] Malfunction table
28
Malfunction table
Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Malfunction table
Stainless steel Hot soapy water:
Clean using a dish cloth and then dry
with a soft cloth. Remove traces of
limescale, grease, starch and albumin
(e.g. egg white) immediately. Corrosion
can form under such residues. Special
stainless steel cleaning agents can be
obtained from the after-sales service or
from specialist retailers.
Cooking compart-
ment made of stain-
less steel
Hot soapy water or a vinegar solution:
Clean using a dish cloth and then dry
with a soft cloth.
If the oven is very dirty: use oven
cleaner, but only when cooking com-
partment is cold. It is best to use a stain-
less-steel sponge. Do not use oven
spray or other aggressive oven cleaners
or abrasive materials. Scouring pads,
rough sponges and pan cleaners are
also unsuitable. These agents scratch
the surface. Allow the interior surfaces
to dry thoroughly.
Area Cleaning agents
Door panels Glass cleaner:
Clean with a dish cloth. Do not use a
glass scraper.
Glass cover for the
cooking compart-
ment light
Hot soapy water:
Clean with a dish cloth.
Door seal
Do not remove.
Hot soapy water:
Clean with a dish cloth; do not scrub. Do
not use a metal or glass scraper for
cleaning.
Accessories Hot soapy water:
Soak and clean with a dish cloth or a
brush.
Area Cleaning agents
Problem Possible cause Remedy/information
The appliance does not work Faulty circuit breaker Look in the fuse box to make sure that the circuit
breaker for the appliance is OK.
Plug not plugged in Plug the plug in
Power cut Check whether the kitchen light is working.
Incorrect operation Switch off the circuit breaker in the fuse box.
Reconnect it after approx. 10 seconds.
Three zeros are flashing in the dis-
play.
Power cut Reset the clock.
The appliance is not in operation. A
cooking time appears in the dis-
play.
The
ƒ button was not pressed after the set-
ting had been made.
Press the ƒ button or switch the appliance off.
The microwave does not switch on. The door was not fully closed. Check whether food remains or foreign material
is trapped in the door. Make sure that the seal-
ing surfaces are clean. Check whether the door
seal is twisted.
The
ƒ button has not been pressed. Press the ƒ button.
It takes longer than before for the
food to heat up.
The microwave power setting is too low. Select a higher power setting.
A larger amount than usual has been
placed in the appliance.
Double the amount = almost double the time
The food was colder than usual. Stir or turn the food during cooking
A signal sounds. The two dots in
the display are flashing.
The appliance is in demo mode.
1. Press the
°±² button.
2. Press and hold the
o button for three sec-
onds.
Demo mode is deactivated.

Содержание

Area Cleaning agents Area Cleaning agents Stainless steel Hot soapy water Clean using a dish cloth and then dry with a soft cloth Remove traces of limescale grease starch and albumin e g egg white immediately Corrosion can form under such residues Special stainless steel cleaning agents can be obtained from the after sales service or from specialist retailers Door panels Glass cleaner Clean with a dish cloth Do not use a glass scraper Glass cover for the cooking compart ment light Hot soapy water Clean with a dish cloth Door seal Do not remove Hot soapy water Clean with a dish cloth do not scrub Do not use a metal or glass scraper for cleaning Accessories Hot soapy water Soak and clean with a dish cloth or a brush Cooking compart Hot soapy water or a vinegar solution ment made of stain Clean using a dish cloth and then dry less steel with a soft cloth If the oven is very dirty use oven cleaner but only when cooking com partment is cold It is best to use a stainless steel sponge Do not use oven spray or other aggressive oven cleaners or abrasive materials Scouring pads rough sponges and pan cleaners are also unsuitable These agents scratch the surface Allow the interior surfaces to dry thoroughly Malfunction table Malfunctions often have simple explanations Please refer to the malfunction table before calling the after sales service If a meal does not turn out exactly as you wanted refer to the Tested for you in our cooking studio section where you will find plenty of cooking tips and tricks Risk of electric shock Incorrect repairs are dangerous Repairs may only be carried out by one of our trained after sales engineers Malfunction table Problem Possible cause Re me dy i n f orm at i on The appliance does not work Faulty circuit breaker Look in the fuse box to make sure that the circuit breaker for the appliance is OK Plug not plugged in Plug the plug in Power cut Check whether the kitchen light is working Incorrect operation Switch off the circuit breaker in the fuse box Reconnect it after approx 10 seconds Three zeros are flashing in the dis play Power cut Reset the clock The appliance is not in operation A cooking time appears in the dis play The B button was not pressed after the set ting had been made Press the B button or switch the appliance off The microwave does not switch on The door was not fully closed Check whether food remains or foreign material is trapped in the door Make sure that the seal ing surfaces are clean Check whether the door seal is twisted The B button has not been pressed Press the B button The microwave power setting is too low Select a higher power setting A larger amount than usual has been placed in the appliance Double the amount almost double the time The food was colder than usual Stir or turn the food during cooking It takes longer than before for the food to heat up A signal sounds The two dots in the display are flashing The appliance is in demo mode 1 Press the M button 2 Press and hold the button for three sec onds Demo mode is deactivated 28

Скачать