Qtech QSW-8200-52T-AC [18/36] Enable

User Manual

Chapter 3. Commands for MRPP 18

www.qtech.ru

 Function: Open MRPP debug information; “no description” command disables MRPP

debug information.

 Command Mode: Admin Mode

 Parameter: None.

 Usage Guide: Enable MRPP debug information, and check message process of MRPP

protocol and receive data packet process, it is helpful to monitor debug.

 Example: Enable debug information of MRPP protocol.

 Switch#debug mrpp

3.4 enable

 Command: enable

 no enable

 Function: Enable configured MRPP ring, the “no enable” command disables this

enabled MRPP ring.

 Parameter:

 Command Mode: MRPP ring mode

 Default: Default disable MRPP ring.

 Usage Guide: Executing this command, it must enable MRPP protocol, and if other

commands have configured, the MRPP ring is enabled.

 Example: Configure MRPP ring 4000 of switch to primary node, and enable the MRPP

ring.

 Switch(config)#mrpp enable

 Switch(config)#mrpp ring 4000

 Switch(mrpp-ring-4000)#control-vlan 4000

 Switch(mrpp-ring-4000)# node-mode master

 Switch(mrpp-ring-4000)#fail-timer 18

 Switch(mrpp-ring-4000)#hello-timer 6

 Switch(mrpp-ring-4000)#enable

 Switch(mrpp-ring-4000)#exit

 Switch(config)#in ethernet1/0/1

 Switch(config-If-Ethernet1/0/1)#mrpp ring 4000 primary-port

 Switch(config)#in ethernet 1/0/3

 Switch(config-If-Ethernet1/0/3)#mrpp ring 4000 secondary-port

3.5 errp domain

 Command: errp domain <domain-id>

 no errp domain <domain-id>

 Function: Create ERRP domain, the no command deletes the configured ERRP domain.

 Parameter: <domain-id> domain ID of ERRP, the range between 1 and 15.

 Command Mode: Global mode