Qtech QSW-8200-52T-AC [21/36] Mrpp poll time

User Manual

Chapter 3. Commands for MRPP 21

www.qtech.ru

 Usage Guide: If the compatible function of ERRP needs to be configured, MRPP

protocol should be enabled firstly. Furthermore, the port with ERRP compatible mode

should be configured as hybrid or trunk mode and allow the packets with Control Vlan

information.

 Example: Enable the compatible function of ERRP globally.

 Switch(Config)#mrpp enable

 Switch(Config)#mrpp errp compatible

 Switch(Config)#mrpp ring 2

 Switch(mrpp-ring-2)#control-vlan 4000

 Switch(config-if-ethernet1/0/51)#switchport mode hybrid

 Switch(config-if-ethernet1/0/51)#switchport hybrid allowed vlan 4000 tag

 Switch(config-if-ethernet1/0/52)#switchport mode hybrid

 Switch(config-if-ethernet1/0/52)#switchport hybrid allowed vlan 4000 tag

3.11 mrpp poll-time

 Command: mrpp poll-time <20-2000>

 Function: Configure the query interval of MRPP.

 Command mode: Global mode.

 Usage Guide: Configure the query time to adjust the query interval of MRPP, the

default interval is 100ms.

 Example: Set the query time as 200ms.

 Switch(Config)# mrpp poll-time 200

3.12 mrpp ring

 Command: mrpp ring <ring-id>

 no mrpp ring <ring-id>

 Function: Create MRPP ring, and access MRPP ring mode, the “no mrpp ring<ring-id>”

command deletes configured MRPP ring.

 Parameter: <ring-id> is MRPP ring ID, the valid range is from 1 to 4096.

 Command Mode: Global Mode

 Usage Guide: If this MRPP ring doesn’t exist it create new MRPP ring when executing

the command, and then it enter MRPP ring mode. It needs to ensure disable this MRPP

ring when executing the “no mrpp ring” command.

 Example:

 Switch(config)#mrpp ring 100

3.13 mrpp ring primary-port

 Command: mrpp ring <ring-id> primary-port

 no mrpp ring <ring-id> primary-port