Qtech QSW-8200-52T-AC [34/36] Ulpp group slave

User Manual

Chapter 4. Commands for ULPP 34

www.qtech.ru

 Usage Guide: There is no sequence requirement for the master and slave port

configuration in a group, but the protective VLANs must be configured before the

member ports. Each group has only one master port, if the master port exists, then the

configuration fail.

 Example: Configure the master port of ULPP group.

 Switch(config)# interface ethernet 1/0/1

 Switch(config-If-Ethernet1/0/1)# ulpp group 20 master

4.29 ulpp group slave

 Command: ulpp group <integer> slave

 no ulpp group <integer> slave

 Function: Configure the slave port of ULPP group, the no command deletes the slave

port.

 Parameter: <integer> is the ID of ULPP group, the range from 1 to 48.

 Default: There is no slave port configured by default.

 Command mode: Port mode.

 Usage Guide: There is no sequence requirement for the master and slave port

configuration in a group, but the protective VLANs must be configured before the

member ports. Each group has only one slave port, if the slave port exists, then the

configuration is fail.

 Example: Configure the slave port of ULPP group.

 Switch(config)# interface ethernet 1/0/2

 Switch(config-If-Ethernet1/0/2)# ulpp group 20 slave