Qtech QSW-8200-52T-AC [8/36] Show vrrp

User Manual

Chapter 1. Commands for VRRP 8

www.qtech.ru

 Switch(Config-Router-Vrrp)#preempt-mode false

1.8 priority

 Commands: priority <value>

 Function: Configures VRRP priority.

 Parameters: < value> is the priority value, ranging from 1 to 254.

 Default: The priority of all backup routers (or L3 Ethernet switch) in a Standby cluster is

100.

 Command mode: VRRP protocol configuration mode

 Usage Guide: Priority determines the ranking of a router (or L3 Ethernet switch) in a

Standby cluster, the higher priority the more likely to become the Master. When a

router (or L3 Ethernet switch) is configured as Master dummy IP address, its priority is

always 254 and does not allow modification. When 2 or more routers (or L3 Ethernet

switch) with the same priority value present in a Standby cluster, the router (or L3

Ethernet switch) with the greatest VLAN interface IP address becomes the Master.

 Example: Setting VRRP priority to 150.

 Switch(Config-Router-Vrrp)# priority 150

1.9 router vrrp

 Commands: router vrrp <vrid>

 no router vrrp <vrid>

 Function: Creates/Removes the Virtual Router.

 Parameters: <vrid> is the Virtual Router number ranging from 1 to 255.

 Default: Not configured by default.

 Command mode: Global Mode

 Usage Guide: This command is used to create/remove Virtual Router, which is

identified by a unique Virtual Router number. Virtual Router configurations are only

available when a Virtual Router is created, 192 Virtual Routers can be configured at

best.

 Example: Configuring a Virtual Router with number 10.

 Switch(config)# router vrrp 10

1.10 show vrrp

 Commands: show vrrp [<vrid>]

 Function: Displays status and configuration information for the VRRP standby cluster.

 Parameters: < vrid > is the Virtual Router number ranging from 1 to 255.

 Command mode: Admin and Configuration Mode.