Kohler Command PRO CH260 [4/100] Maintenance
![Kohler Command PRO CH270 [4/100] Maintenance](/views2/1597218/page4/bg4.png)
4
Maintenance
KohlerEngines.com 17 690 01 Rev. J
OIL RECOMMENDATIONS
We recommend use of Kohler oils for best performance.
Other high-quality detergent oils (including synthetic)
of API (American Petroleum Institute) service class SJ
or higher are acceptable. Select viscosity based on
air temperature at time of operation as shown in table
below.
FUEL RECOMMENDATIONS
WARNING
Explosive Fuel can cause fi res and severe
burns.
Do not fi ll fuel tank while engine is hot or
running.
Gasoline is extremely fl ammable and its vapors can
explode if ignited. Store gasoline only in approved
containers, in well ventilated, unoccupied buildings,
away from sparks or fl ames. Spilled fuel could ignite
if it comes in contact with hot parts or sparks from
ignition. Never use gasoline as a cleaning agent.
NOTE: E15, E20 and E85 are NOT approved and
should NOT be used; effects of old, stale or
contaminated fuel are not warrantable.
Fuel must meet these requirements:
● Clean, fresh, unleaded gasoline.
● Octane rating of 87 (R+M)/2 or higher.
● Research Octane Number (RON) 90 octane minimum.
● Gasoline up to 10% ethyl alcohol, 90% unleaded is
acceptable.
● Methyl Tertiary Butyl Ether (MTBE) and unleaded
gasoline blend (max 15% MTBE by volume) are
approved.
● Do not add oil to gasoline.
● Do not overfi ll fuel tank.
● Do not use gasoline older than 30 days.
STORAGE
If engine will be out of service for 2 months or more
follow procedure below.
1. Add Kohler PRO Series fuel treatment or equivalent
to fuel tank. Run engine 2-3 minutes to get stabilized
fuel into fuel system (failures due to untreated fuel
are not warrantable).
2. Change oil while engine is still warm from operation.
Remove spark plug(s) and pour about 1 oz. of
engine oil into cylinder(s). Replace spark plug(s) and
crank engine slowly to distribute oil.
3. Disconnect negative (-) battery cable.
4. Store engine in a clean, dry place.
Содержание
- Ch260 ch440 service manual 1
- Safety 2
- Maintenance 3
- Maintenance 4
- Specifications 5
- Specifi cations 5
- Specifi cations 6
- Specifi cations 7
- Specifi cations 8
- Specifi cations 9
- Specifi cations 10
- Specifi cations 11
- Specifi cations 12
- Specifi cations 13
- Specifi cations 14
- Specifi cations 15
- Specifi cations 16
- Specifi cations 17
- Tools and aids 18
- Tools and aids 19
- Tools and aids 20
- Troubleshooting 21
- Troubleshooting 22
- Troubleshooting 23
- Troubleshooting 24
- Air cleaner intake 25
- Warning 25
- Fuel system 26
- Fuel system 27
- Fuel system 28
- Fuel system 29
- Governor system 30
- Governor system 31
- Governor system 32
- Governor system 33
- Governor system 34
- Governor system 35
- Governor system 36
- Governor system 37
- Governor system 38
- Lubrication system 39
- Electrical system 40
- Electrical system 41
- Electrical system 42
- Electrical system 43
- Electrical system 44
- Electrical system 45
- Electrical system 46
- Starter system 47
- Starter system 48
- Starter system 49
- Starter system 50
- Warning 50
- Starter system 51
- Gear reduction system 52
- Gear reduction system 53
- Gear reduction system 54
- Gear reduction system 55
- Gear reduction system 56
- Gear reduction system 57
- Gear reduction system 58
- Gear reduction system 59
- Gear reduction system 60
- Gear reduction system 61
- Gear reduction system 62
- Gear reduction system 63
- Gear reduction system 64
- Disassembly inspection and service 65
- Disassembly inspection and service 66
- Disassembly inspection and service 67
- Disassembly inspection and service 68
- Disassembly inspection and service 69
- Disassembly inspection and service 70
- Disassembly inspection and service 71
- Disassembly inspection and service 72
- Disassembly inspection and service 73
- Disassembly inspection and service 74
- Disassembly inspection and service 75
- Disassembly inspection and service 76
- Disassembly inspection and service 77
- Disassembly inspection and service 78
- Disassembly inspection and service 79
- Disassembly inspection and service 80
- Disassembly inspection and service 81
- Reassembly 82
- Reassembly 83
- Reassembly 84
- Reassembly 85
- Reassembly 86
- Reassembly 87
- Reassembly 88
- Reassembly 89
- Reassembly 90
- Reassembly 91
- Reassembly 92
- Reassembly 93
- Reassembly 94
- Reassembly 95
- Reassembly 96
- Reassembly 97
Похожие устройства
- Kohler Command PRO CH260 Руководство пользователя
- KSB Multitec MTC B 65/4F Инструкция по эксплуатации
- KSB Multitec MTC B 65/4F Технические данные
- KSB Multitec MTC B 65/4V Инструкция по эксплуатации
- KSB Multitec MTC B 65/4V Технические данные
- KSB Multitec MTC B 65/5A Инструкция по эксплуатации
- KSB Multitec MTC B 65/5A Технические данные
- KSB Multitec MTC B 65/5B Инструкция по эксплуатации
- KSB Multitec MTC B 65/5B Технические данные
- Kohler SH265 Руководство по обслуживанию
- Kohler SH265 Руководство пользователя
- KSB Multitec MTC B 65/5C Инструкция по эксплуатации
- KSB Multitec MTC B 65/5C Технические данные
- KSB Multitec MTC B 65/5D Инструкция по эксплуатации
- KSB Multitec MTC B 65/5D Технические данные
- KSB Multitec MTC B 65/5E Инструкция по эксплуатации
- KSB Multitec MTC B 65/5E Технические данные
- KSB Multitec MTC B 65/5F Инструкция по эксплуатации
- KSB Multitec MTC B 65/5F Технические данные
- Kohler RH265 Руководство по обслуживанию