Planet VF-102-KIT [10/16] Hardware description

2. HARDWARE DESCRIPTION

2.1 Front Panel

The units’ front panel provides a simple interface monitoring the

converter. There are FC ber optical interface and VIDEO socket

in the front panel. For the VF-102-T / VF-102-R which reverse

data connector, the RS485/422 DATA port may be connected to

the user’s interface end.

PWR

GND

LNK

VF-102

Video over Fiber Converter

OPTIC

VIDEO

RS422/485

2.1.1 Ports connection

Video

Connection:

Connecting the video signal to or from the

product through a 75Ω coax cable with BNC

plug.

Async-data

Connection:

● Connect the output data port (eg. TX+ and

TX-) of other control device to the RX+ and

RX- of the RX.

● Connect the input data port (eg. RX+ and

RX-) of other under controlled device to the

TX+ and TX- of the TX.

● GND in both TX and RX should be

connected directly to user’s equipment.

Fiber

Connection:

Connect the ber-optic cable pigtail (with

FC/PC or ST/PC optical connector) to the

product’s FIBER port.

2.1.2 LED Indicators

The rich diagnostic LEDs on the front panel can provide the

operating status of individual port and whole system. There are

“POWER”, “VIDEO”, “LINK” 3 LEDs in the front panel of TX/RX.

Each LED lightens means: