Planet VF-102-KIT [12/16] Install the converter

3 INSTALL THE CONVERTER

This section describes how to install your VF-102 Media

Converter and make connections to the converter. Please read

the following topics and perform the procedures in the order

being presented. The hardware installation of PLANET VF-

102 Media Converter do not need software conguration. To

install your VF-102 on a desktop or shelf, simply complete the

following steps.

3.1 Limitation

The Converter does not require any software conguration.

Users can immediately use any feature of this product simply

by attached the cables and plug power on. There is some key

limitation on the video over ber converter. Please check the

following items:

The device is used for Point-to-Point connection only (trans-

mitter to receiver) and allows video and data work on the

same optical ber patch cord.

The BNC connector and supports 75 ohm cable. The distance

will change by the quality of coaxial cables.

3.2 Stand-alone Installation

To install a VF-102-T / VF-102-R stand-alone, on a desktop or

shelf, simply complete the following steps:

Step 1: Turn off the power of the analog camera / monitor to

which the VF-102-T / VF-102-R will be attached.

Step 2: VF-102-T (Transmitter): Connect coaxial cable from

analog camera to Video BNC port of the VF-102-T.

Step 3: Attach FC single mode ber cable from the VF-102-T to

VF-102-R in the remote side.