Planet VC-230N Инструкция по эксплуатации онлайн [49/77] 66136

WEP: Disable or enable WEP.

Radius Server

IP Address: Enter the IP address of Radius Server.

Port: The default port of the RADIUS server for authentication is 1812. You need not

change this value unless your network administrator instructs you to do so with

additional information.

Shared Secret: Enter a password as the key to be shared between the external

authentication server and the access point. The key is not send over the network.

This key must be the same on the external authentication server and your router.

Session Timeout: Set the time interval for session. Enter the proper value in the

field.

Idle Timeout: Set the idle time interval. Enter the proper value in the field.

Access Policy

Policy: There are three options, including Disable, Allow, and Reject. You can choose

Disable, Allow or Reject. Select Allow, only the clients whose MAC address is listed

can access the router. Select Reject, the clients whose MAC address is listed are

denied to access the router.

Add a station MAC: If you want to add a station MAC, enter the MAC address of the

wireless station that are allowed or denied access to your router in this address field.

After finishing the settings above, click Apply to save the settings and make the new

configuration take effect. Click Cancel to close without saving.