Viking MB 248 T [49/346] De pl sl tr hu sr hr lv lt ro ru bg et mk en

Viking MB 248 T [49/346] De pl sl tr hu sr hr lv lt ro ru bg et mk en
47
DEPLSLTRHUSRHRLVLTRORUBGETMK EN
0478 111 9820 B - EN
Fault:
Engine will not start
Possible cause:
Motorstop lever not pressed.
No fuel in tank; fuel line blocked.
Inferior, dirty or old fuel in tank.
Air filter dirty.
Spark plug socket detached from spark
plug; ignition lead not properly fastened
to socket.
Spark plug dirty or damaged; incorrect
electrode gap.
Primer not pressed.
Remedy:
Press motorstop lever to handlebar and
hold. (Ö 8.1)
Top up fuel; clean fuel line. #
Always use fresh, good quality fuel,
normal unleaded petrol; clean
carburettor. #
Clean air filter. #
Connect spark plug socket; check
connection between ignition lead and
socket. #
Clean or replace spark plug; adjust
electrode gap. #
Press primer three times before
starting. (Ö 10.1)
Fault:
Starting problems or deteriorating engine
power.
Possible cause:
Lawn mower housing blocked.
Mowing at an excessively low cutting
height or fast pushing speed.
Water in fuel tank and carburettor;
carburettor blocked.
Fuel tank contaminated.
Air filter dirty.
Spark plug dirty.
Remedy:
Clean lawn mower housing (detach
spark plug socket!). (Ö 11.2)
Set lower cutting height/reduce pushing
speed. (Ö 7.7)
Empty fuel tank, clean fuel line and
carburettor. #
Clean fuel tank. #
Clean air filter. #
Clean spark plug. #
Fault:
Engine overheating.
Possible cause:
Oil level in engine too low.
Cooling ribs dirty.
Remedy:
Change engine oil. (Ö 7.8)
Clean cooling ribs. (Ö 11.2)
Fault:
Excessive vibration during operation.
Possible cause:
Cutting unit defective.
Engine mounting loose.
Remedy:
Check mowing blade, blade shaft and
blade fastening (blade fastening screw
and retaining washer), and repair if
necessary. #
Tighten engine mounting bolts. #
18. Troubleshooting
# If necessary, contact a specialist
dealer; VIKING recommends VIKING
specialist dealers.
@ See engine instruction manual.

Содержание