Nissan Note [24/60] Operation procedure of current measurement probe for consult ii

SC-24

CHARGING SYSTEM

OPERATION PROCEDURE OF CURRENT MEASUREMENT PROBE FOR CONSULT-II

For details, refer to the supplied “CONSULT-II Current Probe Operation Manual”.

1. Turn current probe power supply OFF and connect to CONSULT-II. (Red: CH1, Black: Ground)

2. Touch “SUB MODE”.

3. Touch “Extending Measurement Mode” on “SUB MODE” screen.

4. CAUTION is displayed, touch “OK”.

5. Set current probe range switch at the range to measure, turn

current probe power supply ON. When measuring dark current,

set 4A range. (Check that POWER indicator turns on. Refer to

CONSULT-II Current Probe Operation Manual.)

6. Touch the same measuring range at CONSULT-II.

NOTE:

If current probe measuring range is different from CONSULT-II

measuring range, incorrect value is displayed.

7. Adjust 0 point of current probe or CONSULT-II. (Do not clamp

anything to probe.)

NOTE:

If 0 point is dislocated greatly, adjust at current probe side gen-

erally.

8. Align current direction mark, clamp harness, and measure cur-

rent. If current direction is incorrect, it is displayed negative

value.

NOTE:

● When current is measured, close probe joint securely.

● If multiple harnesses are clamped, measurement cannot be

performed. Always clamp only one.

MKIA0071E

MKIA0072E

MKIA0073E

MKIA0074E