Home
Главная
Binatone
Соковыжималка
JE-800
Инструкция по эксплуатации Страница: 6

Binatone JE-800 [6/30] Assembling

BEFORE FIRST USE

 Read the instruction manual below.

 Remove all of the packing materials from the

juicer.

 Wash thoroughly all of the juicer parts that may

contact the food.

 Check if the appliance is assembled properly

(see section “Assembling”).

INSTRUCTION MANUAL

Assembling

1. Place the juicer upon a dry clean horizontal sur-

face.

2. Place the separator (6) upon the juicer case

(10) at approx. 30–40° angle and fix it by turn-

ing counter-clockwise until a click is heard (see

Picture B).

3. Put the grater-filter (9) over separator (6) so that the former locks

on its fixing piece (11); check if it rotates freely.

Note: when disassembling the appliance remove the grater-

filter (9) together with the separator (6); to do that

turn the separator clockwise at 30–40°, pull it

upwards, and then remove the grater-filter (9).

4. Close the juicer with the lid (3). To do that, press the latches (4)

upper parts, carefully put the lid on the separator (6) and release

the latches to firmly fix the lid on the juicer case. Check if the lid is

fixed properly.

Note: Your juicer is equipped with an automatic protection

system. The appliance will not work if the latches (4)

or the lid (3) are not closed and it will automatically

turn itself off if they are accidentally opened during

the process.

5. Place the pulp collector (14) under the pulp outlet (8), then put the

measuring glass for juice (13) under the separator nozzle (6).

The foam separator is intended to separate the foam from the juice.

Collect the juice in the main compartment of the measuring glass

(13), and whilst serving it through the spout - the foam will remain

at the bottom of the measuring glass (13). You may use any other

jug of appropriate size instead of the measuring glass (13).

6. Your juicer is has as anti-drip system. When the appliance is not in

use, snap up the nozzle (7), which will prevent the juice dripping

onto your table. Before using the juicer always open the nozzle

(7) to prevent juice from lingering in the separator. Never load

products into the juicer with the nozzle shut.

7. Install the hopper (2) on the product inlet (5) so that you may place

the fruit and vegetables there while making juice. Because the hop-

per (2) profile is exactly the same as the lid (3) one, when putting

the juicer away for storage just turn the hopper over to save space.

Содержание

Похожие устройства

BEFORE FIRST USE Read the instruction manual below Remove all of the packing materials from the juicer Wash thoroughly all of the juicer parts that may contact the food Check if the appliance is assembled properly see section Assembling INSTRUCTION MANUAL Assembling Place the juicer upon a dry clean horizontal sur face Place the separator 6 upon the juicer case 10 at approx 30 40 angle and fix it by turn ing counter clockwise until a click is heard see Picture B 3 Put the grater filter 9 over separator 6 so that the former locks on its fixing piece 11 check if it rotates freely Note when disassembling the appliance remove the grater filter 9 together with the separator 6 to do that turn the separator clockwise at 30 40 pull it upwards and then remove the grater filter 9 4 Close the juicer with the lid 3 To do that press the latches 4 upper parts carefully put the lid on the separator 6 and release the latches to firmly fix the lid on the juicer case Check if the lid is fixed properly Note Your juicer is equipped with an automatic protection system The appliance will not work if the latches 4 or the lid 3 are not closed and it will automatically turn itself off if they are accidentally opened during the process 5 Place the pulp collector 14 under the pulp outlet 8 then put the measuring glass for juice 13 under the separator nozzle 6 The foam separatoris intended to separate the foam from the juice Collect the juice in the main compartment of the measuring glass 13 and whilst serving it through the spout the foam will remain at the bottom of the measuring glass 13 You may use any other jug of appropriate size instead of the measuring glass 13 6 Your juicer is has as anti drip system When the appliance is not in use snap up the nozzle 7 which will prevent the juice dripping onto your table Before using the juicer always open the nozzle 7 to prevent juice from lingering in the separator Never load products into the juicer with the nozzle shut 7 Install the hopper 2 on the product inlet 5 so that you may place the fruit and vegetables there while making juice Because the hop per 2 profile is exactly the same as the lid 3 one when putting the juiceraway forstorage just turn the hopper overto save space Sinatone 6

Скачать

Случайные обсуждения

Ответы 2

Как снять сито?

4 года назад

Ответы 1

Как почистить?

7 лет назад

Ответы 1

Как снять верхнюю часть корпуса (разделитель)?