Home
Главная
Binatone
Соковыжималка
JE-800
Инструкция по эксплуатации Страница: 7

Binatone JE-800 [7/30] Care and cleaning

ENGLISH

Usage

1. Before plugging your juicer in check that the switch (12) is in “0”

position and that the latches (4) are properly closed.

2. Prepare the food for processing. To achieve the best performance

of your juicer always observe the following rules:

 Cut the food into medium sized pieces; small pieces reduce the

juicer productivity.

 Do not load more than one piece of product at a time into the

product inlet (3). Load the next piece after the previous one is

fully processed and the juice stopped coming out of the nozzle.

 After putting the product pieces into the product inlet (3) slowly

push it through to the processing zone using the pusher (1), do

not use excess force.

3. Place a glass under the separator nozzle (6). Open the nozzle (7).

4. Turn the juicer on by selecting appropriate speed with switch (12).

For the best juicer performance use speed 1 for softer food (e.g.

apples) and speed 2 for harder foods (such as carrots).

5. Lower the sliced fruit into the product inlet (5) and push then inside

gently with the pusher (1). Do not use excess force it will only

reduce the juicer productivity.

6. When you lower the sliced fruit or vegetables into the juicer, the

motor should not stop.

7. If in the process the pulp collector (14) gets full, switch the appli-

ance off and take the pulp collector out of the juicer by the handle.

Clean the collector and install it on its place again. Switch the juicer

on to resume the work.

8. After use wash the juicer and thoroughly dry all of its components.

CARE AND CLEANING

1. Unplug and disassemble the juicer.

2. To avoid accidents do not immerse the juicer

case (10) into water or any other liquid. Just

wipe it with cloth soaked in soapy water.

3. We recommend you to wash all other juicer

components in soapy water using soft sponge.

Do not use scrubbers or abrasive detergents.

4. Some foods, e.g. carrot, oranges, etc. will stain the plastic to re-

duce this, try a solution of 2–3 teaspoonfuls of 9% vinegar in a

glass of water. After that rinse the components with water as usual.

5. To avoid the juicer choking up after each use wash the separator

nozzle (7). To do that, remove the nozzle from the separator (6).

Remove separator (6) from appliance by pulling the nozzle from

below, then pull it off the fixing prongs (see Picture C). Atten-

tion: the nozzle (7) is inseparable! Thoroughly wash the sepa-

rator (6) and nozzle (7), then replace the nozzle reversing the

procedure. Do not use the juicer without the nozzle (7).

6. To avoid damages handle the grater-filter with care (9). Improper

use of this component may result in breakage. Observe the fol-

lowing maintenance rules:

– Wash the grater-filter with a soft brush.

– Do not use detergents containing chlorinated lime and metal

brushes.

– In case the grater-filter gets damaged you should replace it

with a new one.

Содержание

Похожие устройства

1 Before plugging your juicer in check that the switch 12 is in 0 position and that the latches 4 are properly closed 2 Prepare the food for processing To achieve the best performance of your juicer always observe the following rules Cut the food into medium sized pieces small pieces reduce the juicer productivity Do not load more than one piece of product at a time into the product inlet 3 Load the next piece after the previous one is fully processed and the juice stopped coming out of the nozzle After putting the product pieces into the product inlet 3 slowly push it through to the processing zone using the pusher 1 do not use excess force 3 Place a glass under the separator nozzle 6 Open the nozzle 7 4 Turn the juicer on by selecting appropriate speed with switch 12 For the best juicer performance use speed 1 for softer food e g apples and speed 2 for harder foods such as carrots 5 Lower the sliced fruit into the product inlet 5 and push then inside gently with the pusher 1 Do not use excess force it will only reduce the juicer productivity 6 When you lower the sliced fruit or vegetables into the juicer the motor should not stop 7 If in the process the pulp collector 14 gets full switch the appli ance off and take the pulp collector out of the juicer by the handle Clean the collector and install it on its place again Switch the juicer on to resume the work 8 After use wash the juicer and thoroughly dry all of its components CARE AND CLEANING Unplug and disassemble the juicer To avoid accidents do not immerse the juicer case 10 into water or any other liquid Just wipe it with cloth soaked in soapy water We recommend you to wash all other juicer components in soapy water using soft sponge Do not use scrubbers or abrasive detergents 4 Some foods e g carrot oranges etc will stain the plastic to re duce this try a solution of 2 3 teaspoonfuls of 9 vinegar in a glass of water Afterthat rinse the components with water as usual 5 To avoid the juicer choking up after each use wash the separator nozzle 7 To do that remove the nozzle from the separator 6 Remove separator 6 from appliance by pulling the nozzle from below then pull it off the fixing prongs see Picture C Atten tion the nozzle 7 is inseparable Thoroughly wash the sepa rator 6 and nozzle 7 then replace the nozzle reversing the procedure Do not use the juicer without the nozzle 7 6 To avoid damages handle the grater filter with care 9 Improper use of this component may result in breakage Observe the fol lowing maintenance rules Wash the grater filter with a soft brush Do not use detergents containing chlorinated lime and metal brushes In case the grater filter gets damaged you should replace it with a new one 7 Binatone ENGLISH Usage

Скачать

Случайные обсуждения

Ответы 1

Как разобрать чтоб помыть

1 год назад

Ответы 1

Как почистить?

7 лет назад

Ответы 1

Какие особые меры безопасности следует соблюдать при использовании соковыжималки?