Bomann MWG 2218 H CB [82/118] Cleaning

Bomann MWG 2218 H CB [82/118] Cleaning
82
Example: 7:30 minutes cooking time at 100% power;
start time 14:20 o’clock
Step Button Display
1 MICROWAVE P100 (Power setting)
2
START/+30SEC./
CONFIRM
3 7:30 (Cooking time)
4 CLOCK/PRE-SET 10:45 (Current time)
5 14:45 (Set hour)
6 CLOCK/PRE-SET 14:45
7 14:20 (Set minutes)
8
START/+30SEC./
CONFIRM
10:45 (Current time)
Note:
During this programmed setting the functions of the controls
are blocked (except: CLOCK/PRE-SET and STOP/CLEAR).
If you wish to display the start time again, press the CLOCK/
PRE-SET button.
When the pre-set time has been reached, the microwave will
start operation. Two signal tones will indicate the start.
Warning: Risk of re!
Always supervise the device during operation.
When using the time-delay function, set the time in such a
way that the device will be operating under proper supervi-
sion.
Do not operate the microwave empty.
If you take the food earlier from the device, you will have to
terminate the function by pressing the STOP/CLEAR button.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Locking (Child-proof lock)
Press and hold the STOP/CLEAR button for more than 3 seconds
to lock the device. The display will show the locked setting. The
functions of the controls are blocked. Press and hold the STOP/
CLEAR button again for more than 3 seconds to unlock.
Display function
During microwave, grilling, combination or convection (without
preheating) mode, the mode or temperature setting is displayed
by pressing the buttons MICROWAVE, DOUBLE GRILL/COMBI.
or CONVECTION for 2 - 3 seconds.
In disregard to the operation mode, the display will be showing
the current time for 2-3 seconds when pressing the CLOCK/
PRE-SET button.
During time-delay mode, press the CLOCK/PRE-SET button to
display the start time.
Cleaning
Turn the microwave off and disconnect the plug.
Interior
Keep the interior of the microwave clean. Use a damp cloth to
remove splashing and spilling on the walls of the microwave. If
the device is very dirty, you may also use a mild detergent. Do
not use aggressive detergents.
Use a damp cloth to wipe the viewing window inside and
outside, and regularly remove splashing and spots caused by
spilled liquids.
Exterior
Clean the exterior walls of the enclosure with a damp cloth only.
Make sure no water enters the openings in the enclosure and
therefore the inside of the device.
Use a damp cloth to clean the switches. When cleaning the
function switches, rst open the door in order to avoid acciden-
tally switching on the device.
Accessories
If required, clean the metal plate with dish detergent.
Regularly clean the guide ring and the inside of the bottom. You
may remove the guide ring and manually clean it. Use a mild
detergent or glass cleaner. Dry thoroughly. Make sure to position
the ring properly afterwards.
Odor
In order to remove unpleasant odor in the microwave, place
a bowl suitable for microwave use lled with water and lemon
juice in the device and heat for approx. 5 minutes. Then wipe the
oven with a soft cloth.
Oven lights
Please contact a service center for replacing the oven lights.
Troubleshooting
Malfunctions are often just caused due to minor problems. Before
contacting our customer service, please check the table below:
Problem Possible cause Notes/ solution
Radio or TV
reception is
interrupted dur-
ing microwave
operation.
The electromagnetic
elds of this device
might interfere with the
pictures and sound of
special frequencies.
This is normal and not
a malfunction. Position
the devices further away
from each other.
The device is
not supplied with
electricity; the
display is black.
Defect wall socket. Try another wall -
socket.
Check the main fuse in -
your household.
The display
shows “0:00”
There was a power
failure.
Set the clock again.

Содержание

Скачать