STATUS MPB20 [6/44] Know your product

KNOW YOUR PRODUCT

• Use clamps or a vice to secure your work whenever possible.

• Watch out for the initial torque reaction of the machine or upon jamming the drill bit.

Switch the power tool immediately upon jamming the drill bit. Watch out for high

reactive torque which may result in kick-back. The drill bit will block if the power tool is

overloaded or if the bit jams into the material.

• Do not touch the drill bit or the processed part during operation and immediately after

that; they may be extremely hot. You may get serious burns.

• Keep work area clean. Blends of materials are particularly dangerous. Dust from light

alloys can burn or explode.

• Rags, cloths, cord, string and the like should never be left around the work area.

• Always switch the machine o prior to leaving it down.

• The tool must be used only for its prescribed purpose. Any use other than those

mentioned in this Manual will be considered a case of misuse. The user and not the

manufacturer shall be liable for any damage or injury resulting from such cases of

misuse.

• To use this tool properly, you must observe the safety regulations, the assembly

instructions and the operating instructions found in this Manual. All persons who use

and service the machine have to be acquainted with this Manual and must be informed

about its potential hazards. Children and frail people must not use this tool. Children

should be supervised at all times if they are in the area in which the tool is being used.

It is also imperative that you observe the accident prevention regulations in force in

your area. The same applies for general rules of occupational health and safety.

• The manufacturer shall not be liable for any changes made to the tool nor for any

damage resulting from such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk

factors. The following hazards may arise in connection with the tool’s construction and

design:

• Damage to hearing if eective ear defenders are not worn.

• Power tools must not be used outdoors in rainy weather, or in moist environment (after

rain) or in close vicinity with easily ammable liquids and gases. The working place

should be well lit.

1. SDS plus socket

2. Operation mode selector switch

3. Forward/reverse switch

4. Battery release button

5. Battery

6. ON/OFF trigger switch

7. Battery state indicator

8. LED light

9. Depth gauge

10. Charger

11. Battery state check button

12. Additional handle