STATUS MPB20 [9/44] Maintenance

MAINTENANCE

SPECIFICATIONS

MAINTENANCE

Your tool requires no additional lubrications or maintenance. There are no user serviceable

parts in your tool, battery pack or charger. Never use water or chemical cleaners to clean

your tool. Wipe clean with a dry cloth. Always store your tool in a dry place. Keep the motor

ventilation slots clean.

Depending on the processed material it is possible that the impact energy may decrease

during operation in «Hammer» mode (chiselling and demolishing and in «Hammer drilling»

mode. To restore the maximum impact energy it is necessary to reduce the revolutions by

decreasing the pressure on the switch trigger (6) until the advent of stable impact.

Before drilling large-diameter holes in metal, rst drill a small pilot hole.

The rotary hammer is suitable for light-duty chiselling. Higher durability and eciency can

be achieved only when using sharp chisels.

SPECIFICATIONS

The manufacturer reserves the right to make changes and improvements to the products and to

alter specications without prior notice.

Model MPB20

Rated voltage 20 V

Charger voltage 220-240V~50Hz

No load speed 0-1400 RPM

No load impact rate 0-4500 IPM

Impact energy 1.7 J

Drilling capacity (concrete) 22 mm

Weight 2.65 kg

А-weighted sound pressure level LpA <85db(A)

А-weighted sound power level LwA 93 db(A)

Vibration emission value ah 5,7 m/s

Includes

charger, battery (1 pc.), front handle,

instruction manual