Jaguar CR-990 [72/108] Edge joining stitch

Jaguar CR-990 [72/108] Edge joining stitch
70
SHELL STITCH
SETTINGS :Presser foot - General Purpose Foot
:Thread tension control - 4
Turn under the raw edge and press. Place the fabric right side up so that the zigzag part of
the stitch sews just over the folded edge, pulling the fabric in to form a shell hem. Trim away
excess fabric close to the stitching line.
Helpful Hint: For a variety in appearance experiment with di󰀨erent width, length
and tension settings.
MULTI-STITCH ZIGZAG
SETTINGS :Presser foot - General Purpose Foot
:Thread tension control - 4
This is a strong stitch because as its name implies, it makes three short stitches where the
normal zig-zag makes only one.
For this reason it is recommended for overcasting nearly all types of fabrics.
It is also ideal for bartacks, mending tears, patching, sewing towelling and attaching at
elastic.
NOTE: Mending a tear or overedging as shown in illustration requires manual
adjustment of the length control.
EDGE-JOINING STITCH
SETTINGS :Presser foot - General Purpose Foot
:Thread tension control - 4
This is a popular decorative stitch (used in sleeves or fronts of blouses and dresses). To
attach two separate pieces of fabric together, leave a little space in between.
To prepare the fabric: Fold under the seam allowances on the cut edges, and press. Baste
folded edges to tissue paper with about 1/8” (0.3 cm) space between. Stitch over the 1/8” (0.3
cm) allowance, just catching the fabric fold on both sides with needle. Remove bastings and
paper; press.

Содержание

Похожие устройства

Скачать