Jaguar CR-990 [86/108] Eyelet stitch

Jaguar CR-990 [86/108] Eyelet stitch
84
SEWING ON A BUTTON
SETTINGS :Presser foot - General Purpose Foot
:Darning plate / Feed dog control -
Position your fabric and button under the presser foot. Lower presser foot. Turn the
handwheel to make sure needle clears both left and right openings of button. Adjust width if
required. Sew 10 stitches across.
If a shank is required, place a pin on top of the button and sew over top of it.
Helpful Hint: To secure thread, pull both threads to the backside of the fabric and
tie together.
Starting point
Точка начала
Точка початку
Бастау нүктесі
Positioning mark
Позиционная отметка
Позиційна відмітка
Позициялық белгі
EYELET STITCH
This stitch is to make eyelet (outer dia.-7 mm, inner dia.-3 mm) on belts etc.
SETTINGS :Presser foot - General Purpose Foot
:Thread tension control - 4
PROCEDURE
*Use an interfacing in the area of garment where eyelets are placed.
*Make a practice on a scrap of the fabric you are using.
1. Select the pattern 85.
2. Carefully mark the position of eyelet on the fabric as illustrated.
3. Place the fabric under the foot. Pull out the bobbin thread underneath the fabric to a
length of about 4 inches (10 cm) to the rear.
4. Lower needle onto the starting point and lower presser foot. Start the machine. When
completed, the machine stops automatically after seam is fastened.
5. Make a hole at the center with an eyelet punch.
*Eyelet punch is not included.
*Sew again to make it strong if pitch is too big.

Содержание

Похожие устройства

Скачать