ELECTRO VOICE RE3-BPHW-8M [19/72] Re3 rx receiver

RE3

UHF Wireless RE3-RX receiver | en 19

Electro

-Voice Installation manual 2018-12 | 01 |

F.01U.362.808

7 RE3-RX receiver

7.1 Product identification

Item

Description, usage and notes

1 Sync signal emitter

This port emits the sync signal to the transmitter. When synchronizing

the transmitter to the receiver, aim the transmitter’s unobstructed sync

port directly toward this emitter. A direct line of sight is required.

Maintain a distance between two inches and twelve inches (or between

5cm and 30cm) for best sync performance.

2 SCAN button

Briefly pressing the SCAN button opens the frequency scan menu.

Pressing and holding the SCAN button for three seconds opens the

scan all groups option directly.

3 SYNC button

A dual-purpose action button.

Primary purpose: press to initiate synchronization of the receiver’s

stored transmitter settings to the transmitter while the receiver is not in

parameter edit mode.

Secondary purpose: As a menu escape button while in parameter

edit mode, press once to return to the previous menu without saving

any changes made. Pressing multiple times will escape back the

number of menus relative to the number of button pushes made with a

final destination of the home screen.

4 SYNC button LED

A circular LED indicator surrounding the SYNC button. The LED will

rapidly flash green during the sync operation and will glow solid green

when sync operation is successful. The LED will remain solid green

after a successful sync operation. If sync fails, the LED will flash green

slowly and constantly until a successful sync operation.