ELECTRO VOICE RE3-BPHW-8M [25/72] Using the result list during the same session

RE3

UHF Wireless RE3-RX receiver | en 25

Electro

-Voice Installation manual 2018-12 | 01 |

F.01U.362.808

Press SET on the group number having the number of open

channels which best meets your wireless system needs. This

advances to the CH number.

CH number is highlighted and displays the first open channel in

the group. While highlighted, scrolling through the open channels

using ▲ or ▼ will identify all open channels in the group. Note

that some channel numbers will not appear as they are not open

at the time of the scan.

Press SET on CH number. This selects that group and channel

the set will operate on.

6 This also returns to Result List on the scan menu.

Either scroll ▼down to Exit and press SET, or press SYNC on the

receiver front panel to return to the home screen. The selected

Group/Channel and associated Frequency displays on the home

screen.

NOTE: This group and channel must be set on the transmitter as well. Follow the SYNC operation

steps to sync the transmitter to the receiver, or manually set the transmitter to this group and

channel.

NOTE: This process is required for any system of sets, either a single set system, or a multi-

channel system.

ALL SETS in a multi-channel system operating on the same frequency band MUST use the same

group number.

7.3.4 Using the result list during the same session

A session is the period of time after a scan has been performed prior to a receiver power-down. All

scan data is stored in temporary memory until power-down. The session expires upon receiver

power-down.

During a session, you can return to the result list to select a different group and channel, or just a

different channel within the same group.

1 Enter the main menu and select Scan by pressing SET.

Press ▼ to scroll down to Result List. Press SET to enter Result

List.