CHAUVET Intimidator Spot 110 [12/18] Operation

Page 10 of 16

Operation

Intimidator Spot 110 User Manual Rev. 2

Manual Mode

To operate the Intimidator Spot 110 manually through the menu, do the following:

1. Press <MENU> repeatedly until MAnu shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select from PAn, tILt, CoLo, Gobo, dIMM, or Stro.

4. Press <ENTER>.

5. Use <UP> or <DOWN> to increase or decrease the value of the function, from 0–255.

6. Press <ENTER>.

7. Repeat steps 3-6 until the product is set as desired.

Configuration (Settings)

Pan Reverse

To set the pan orientation on the Intimidator Spot 110, follow the instructions below:

1. Press <MENU> repeatedly until PAn shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select no (normal pan orientation) or YES (reverse pan orientation).

4. Press <ENTER>.

Tilt Reverse

To set the tilt orientation on the Intimidator Spot 110, do the following:

1. Press <MENU> repeatedly until tILt shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select no (normal tilt orientation) or YES (reverse tilt orientation).

4. Press <ENTER>.

Firmware Version

To view the current firmware version of the Intimidator Spot 110, do the following:

1. Press <MENU> repeatedly until uEr shows on the display.

2. Press <ENTER>.

Factory Reset

To restore the Intimidator Spot 110 to factory default settings, follow the instructions below:

1. Press <MENU> repeatedly until LoAd shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select no (do not reset) or YES (reset to factory defaults).

4. Press <ENTER>.