CHAUVET Intimidator Spot 110 [15/18] Maintenance

Page 13 of 16

Intimidator Spot 110 User Manual Rev. 2

MAINTENANCE

5. Maintenance

Product Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of

the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean

your lighting products at least twice a month. However, be aware that usage and environmental conditions

could be contributing factors to increase the cleaning frequency.

To clean the product, follow the instructions below:

1. Unplug the product from power.

2. Wait until the product is at room temperature.

3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external

surface/vents.

4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl

alcohol.

5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

6. Softly drag any dirt or grime to the outside of the transparent surface.

7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.

Do not spin the cooling fans using compressed air because they could be damaged.